Hi Andreas, I tried the default setup, but it's still not binding to port 500. Is there any other place I should look at?
Thanks, Di 2017-03-07 14:36 GMT-08:00 Andreas Steffen <[email protected]>: > Hi, > > selecting the --enable-all option is not a good idea. This might > lead to the loading of conflicting socket plugins preventing the > charon daemon of starting up at all. > > Couldn't you just start with the default setup > > ./configure --prefix=/usr --sysconfdir=/etc > make > sudo make install > > at the outset and enabling additional desired plugins later on? > > Regards > > Andreas > > On 07.03.2017 22:58, 吕迪 wrote: > > Hi, > > > > I tried to compile and install a strongswan on my computer by doing > > > >> ./configure --prefix=/usr --sysconfdir=/etc --enable-all > >> make > >> sudo make install > > , > > but the charon process is not binding to port 500 for ike when I do > > "sudo ipsec start". > > > > When I run "sudo lsof -i:500 -n -P", nothing shows up. > > > > Please give me some help on this, anything l missed or I should > configure? > > > > Thanks, > > Di > > ====================================================================== > Andreas Steffen [email protected] > strongSwan - the Open Source VPN Solution! www.strongswan.org > Institute for Networked Solutions > HSR University of Applied Sciences Rapperswil > CH-8640 Rapperswil (Switzerland) > ===========================================================[INS-HSR]== > >
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
