| You might use modprobe dummy ifup dummy0 ifconfig [some ip]/32 dummy0 To configure fake network card on vpn server instance and use it as proxy address. If you use in vpn server side subnet the ip address of dummy0 interface and the client side subnet your local network, in this case when you try to connect only to proxy ip address traffic will be forwarded through tunnel others not. Anvar Kuchkartaev [email protected]
Hi all, Does anyone have an example of how to configure a http proxy server / proxy daemon alongside a strongswan VPN tunnel where strongswan is installed on linux? i.e. tinyproxy would be nice or some other method is fine too. Background: at the moment I'm running a tunnel on a small linux device sat on the LAN which acts as a gateway for other devices on the LAN that want to tunnel traffic. This setup works well and it means that devices that want to tunnel traffic have their default gateway configured to the IP address of the VPN gateway device. However this setup means that ALL traffic gets routed via the tunnel for these devices. I'd like the option of running a http proxy server on the VPN gateway device to enable the option of configuring this proxy at application level for some devices on the LAN. Thanks for any help Joe | ||
- [strongSwan] http proxy through tunnel Joe Lippa
- Re: [strongSwan] http proxy through tunnel Matthew Summers
- Re: [strongSwan] http proxy through tunnel Matthew Summers
- Re: [strongSwan] http proxy through tunnel Anvar Kuchkartaev
