Hi all
I have a Hub and Spoke setup. Connections are working perfectly fine.
Throughput is almost reaching the maximum rate of the upload channel
speed, 10 MBit/s.
Unfortunately the latency is not fulfilling my objectives. I have an
average ping time of 39 ms (see below) when pinging clients on other spokes.
VPN internal http requests to a web server of another spoke take some
time until the page is rendered.
I assume this is due to the latency.
Is there any chance to improve the latency? Or is the latency perfectly
good?
Best regards
Martin
Hub internet address
64 bytes from vpn.example.com (217.122.5.6): icmp_seq=1 ttl=57 time=15.2 ms
Internal address of Hub
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=62 time=40.4 ms
Client on another spoke
PING 192.168.1.130 (192.168.1.130) 56(84) bytes of data.
64 bytes from 192.168.1.130: icmp_seq=1 ttl=61 time=108 ms
64 bytes from 192.168.1.130: icmp_seq=2 ttl=61 time=41.8 ms
64 bytes from 192.168.1.130: icmp_seq=3 ttl=61 time=38.0 ms
64 bytes from 192.168.1.130: icmp_seq=4 ttl=61 time=35.2 ms
64 bytes from 192.168.1.130: icmp_seq=5 ttl=61 time=36.4 ms
64 bytes from 192.168.1.130: icmp_seq=6 ttl=61 time=39.1 ms
64 bytes from 192.168.1.130: icmp_seq=7 ttl=61 time=38.1 ms
64 bytes from 192.168.1.130: icmp_seq=8 ttl=61 time=41.6 ms
64 bytes from 192.168.1.130: icmp_seq=9 ttl=61 time=36.0 ms
64 bytes from 192.168.1.130: icmp_seq=10 ttl=61 time=36.7 ms
--- 192.168.1.130 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9013ms
rtt min/avg/max/mdev = 35.295/45.159/108.281/21.146 ms
