On 10.10.2022 Michael Schwartzkopff wrote:
On 10.10.22 15:44, Rene Maurer wrote:
Hi
I am using strongSwan U5.4.0/K4.4.107 (embedded device).
The ipsec tunnel is established over a mobile network and it works fine.
Additionally I have an Ethernet interface eth0 with the address 10.162.110.161.
eth0 is connected to 10.162.110.165.
I am looking for a way to access the devices connected to eth0 also locally and not
only through the tunnel (connections 10.162.110.161 <=> 10.162.110.165 should
work).
Is that even possible? If so how?
You should be able to access the net 10.162.110.160/29 direct. Please check
i.e. with tcpdump.
Thanks for the answer.
That's what I thought too!
But it does not work. The moment I start ipsec, the ping goes wrong. And also
from outside I can't ping the local address anymore (I will test it again).
René
--
Liebe Grüsse
René
