So, it looks like I'm having problems sending out to
wireless.cingular.com. I tried to POST the content of the data file
directly using curl, and I pretty much get the same thing that I get
when mbuni tries. (It does a POST of the data and just sits there.)
I've looked at a commercial app that works (on Windows), and when I do a
packet trace, I see that it's sending everything UDP and the content
looks to be SMIL. So I'm thinking that it's using the WAP1 gateway and
sending SMIL formatted data instead. (Although the udp port (49202) and
host IP) are not what I thought I would find, so maybe I don't
understand WAP as well as I thought I did.)
Any ideas? Can I configure mbuni to send via a wap1 gateway? Am I even
looking in the right direction?
Thanks,
-Ray
Ray Pitmon wrote:
Hi Nikos,
The libmmsbox_mm1 library does a great job of telling kannel to take
the modem offline so that the dialup PPP session can start (and that
works well). The problem that I'm seeing seems to be related more
with libcurl binding to the wrong interface. I was able to add a
configuration setting to specify the libcurl interface (ppp0) and
recompile. This, with a couple sleeps, causes it to bind to ppp0.
(I'm getting further, but it still isn't working correctly; I'll post
my next issue soon :)
Thanks,
-Ray
Nikos Balkanas wrote:
Hi,
Do you need to shutdown kannel? Can mbuni notification work without
kannel? You know that kannel supports HTTP smsc and therefore you can
connect through it.
BR,
Nikos
----- Original Message ----- From: "Ray Pitmon" <r...@pitmon.com>
To: <users@mbuni.org>
Sent: Monday, December 28, 2009 7:45 AM
Subject: [Users] mm1 using wrong interface to send
Hi,
I'm very close to getting mbuni to send out vi MM1 on a GSM modem.
Mbuni will tell kannel to shut down (which it does), and it brings
up the ppp connection.
However, it never seems to connect to AT&T's SMSC. So I did a
tcpdump on the ppp0 interface, and I can see mbuni trying to send
packets on port 80 to the AT&T proxy (wireless.cingular.com), but
the source address is my Ethernet IP instead of what's assigned to
ppp0:
tcpdump -i ppp0 -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol
decode
listening on ppp0, link-type LINUX_SLL (Linux cooked), capture size
96 bytes
23:26:12.984086 IP 172.18.3.15.45500 > 66.209.11.32.80: Flags [S],
seq 3553051624, win 5840, options [mss 1460,sackOK,TS val 151026241
ecr 0,nop,wscale 5], length 0
I've got a static route in place and I can do 'telnet
wireless.cingular.com 80' and it connects to the proxy fine.
Any ideas? I'm looking at changing the libcurl stuff in mmsbox-mm1,
but I thought I'd check to see if there was an easier way.
Here's my custom-settings:
group = mmsc
id = modem
type = custom
custom-settings = "smsc-on=lynx -dump
'http://localhost:13000/start-smsc?password=pass&smsc=modem';smsc-off=lynx
-dump
'http://localhost:13000/stop-smsc?password=pass&smsc=modem';gprs-on=/root/startppp.sh;gprs-pid=cat
/root/ppp-wrapper.pid|head
-1;port=13014;mmsc-url=http://mmsc.cingular.com;proxy=wireless.cingular.com:80;msisdn=6128891111";
mmsc-library = /usr/local/lib/libmmsbox_mm1.so
Thanks in advance,
-Ray
_______________________________________________
Users mailing list
Users@mbuni.org
http://lists.mbuni.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@mbuni.org
http://lists.mbuni.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@mbuni.org
http://lists.mbuni.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@mbuni.org
http://lists.mbuni.org/mailman/listinfo/users
