I have two freeswan setups, one is running cleanly , the other says on starting up :
ipsec_setup: Starting FreeS/WAN IPsec 1.99... ipsec_setup: Using /lib/modules/2.4.20/kernel/net/ipsec/ipsec.o ipsec_setup: /usr/local/lib/ipsec/eroute: pfkey write failed, returning -1 with errno=22. ipsec_setup: Invalid argument, check kernel log messages for specifics. but the log only says : Aug 14 22:07:13 proxy ipsec_setup: /usr/local/lib/ipsec/eroute: pfkey write failed, returning -1 with errno=22. Aug 14 22:07:13 proxy ipsec_setup: Invalid argument, check kernel log messages for specifics. Aug 14 22:07:13 proxy kernel: Aug 14 22:07:13 proxy ipsec_setup: KLIPS ipsec0 on eth1 217.6.109.59/255.255.255.0 broadcast 217.6.109.255 Aug 14 22:07:13 proxy ipsec_setup: ...FreeS/WAN IPsec started I have no idea what the error could be. can anybody give me a hint what to look for ? I checked if ipsec works anyway, but the conntection fails in stage #2 : 002 "road" #1: initiating Main Mode 104 "road" #1: STATE_MAIN_I1: initiate 106 "road" #1: STATE_MAIN_I2: sent MI2, expecting MR2 108 "road" #1: STATE_MAIN_I3: sent MI3, expecting MR3 002 "road" #1: Peer ID is ID_FQDN: '@oproxy.i.omicron.de' 002 "road" #1: ISAKMP SA established 004 "road" #1: STATE_MAIN_I4: ISAKMP SA established 002 "road" #2: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS 112 "road" #2: STATE_QUICK_I1: initiate 010 "road" #2: STATE_QUICK_I1: retransmission; will wait 20s for response (etc.) Any help would be greatly appreciated. Yours, Jakob Curdes _______________________________________________ FreeS/WAN Users mailing list [EMAIL PROTECTED] https://mj2.freeswan.org/cgi-bin/mj_wwwusr
