Toni, Try putting all properties (layers and map) the same : units: "m", projection: "EPSG: 4230", maxExtent:new OpenLayers.Bounds(548757,4138136,716640,4282922)
Here's an similar example : http://dev4.mapgears.com/bdga/simpleMap.html Regards, Alexandre Toni Ramiro wrote: > Ok. I've modified the code this way (the red one): > > var opciones = { > projection:"EPSG:4230", > units:"dd", > maxExtent:new OpenLayers.Bounds(-3,37,0,39) > }; > map = new OpenLayers.Map('map', opciones); > > var sigpac_layer = new OpenLayers.Layer.WMS( > "PNOA", > "http://www.idee.es/wms/PNOA/PNOA";, > { > layers:"pnoa", > version:"1.1.1", > format:"image/png" > }, > { > projection:"EPSG:4230" > }); > map.addLayer(sigpac_layer); > > var mapserver_layer = new OpenLayers.Layer.WMS( > 'Murcia', > 'http://localhost/cgi-bin/mapserv.exe', > { > map:'D:/Desarrollo/MapServer/datos/ms_murcia_qgis_shp.map', > layers:'arquetas_otros_planifrega,regulacion_ext_planifrega,conducciones_planifrega,regulacion_int_planifrega,tomas_planifrega,balsas_planifrega,bombeos_planifrega' > transparent:'true' > }, > { > projection:"EPSG:4326", > units:"m", > maxExtent:new OpenLayers.Bounds(548757,4138136,716640,4282922) > }); > map.addLayer(mapserver_layer); > > map.addControl(new OpenLayers.Control.LayerSwitcher()); > map.addControl(new OpenLayers.Control.MouseToolbar()); > map.addControl(new OpenLayers.Control.MousePosition()); > map.zoomToMaxExtent(); > > > But I've recived the same result. > > Thanks. > > > > 2009/11/12 Alexandre Dube <[email protected] <mailto:[email protected]>> > > Hi Toni, > > Your data projection is in meters, so you must set it in the > OpenLayers.Map object as well. By default, it's in degrees [1]. > Plus, the maxExtent should be in meters too (try using the one > from your mapfile). > > If it's still not working, you can try watching the request built > from OpenLayers in Firebug and see the response. There may more > more clues there. > > Best of luck, > > Alexandre > > [1] > > http://dev.openlayers.org/releases/OpenLayers-2.8/doc/apidocs/files/OpenLayers/Map-js.html#OpenLayers.Map.units > > Toni Ramiro wrote: > > I'm new to this and I've encountered a problem. > > I defined the following code to load one layer with OpenLayers > > var opciones = { > projection:"EPSG:4230", > maxExtent:new OpenLayers.Bounds(-3,37,0,39) > }; > map = new OpenLayers.Map('map', opciones); > var sigpac_layer = new OpenLayers.Layer.WMS( > "PNOA", "http://www.idee.es/wms/PNOA/PNOA";, { > layers:"pnoa", version:"1.1.1", > format:"image/png" > }, { > projection:"EPSG:4230", > units:"m" > }); > map.addLayer(sigpac_layer); > > var mapserver_layer = new OpenLayers.Layer.WMS( > 'Murcia', > 'http://localhost/cgi-bin/mapserv.exe', > { > map:'D:/Desarrollo/MapServer/datos/ms_murcia_qgis_shp.map', > layers:'arquetas_otros_planifrega', > transparent:'true' > }, { > projection:"EPSG:4326", > units:"m" > }); > map.addLayer(mapserver_layer); > > map.addControl(new OpenLayers.Control.LayerSwitcher()); > map.addControl(new OpenLayers.Control.MouseToolbar()); > map.addControl(new OpenLayers.Control.MousePosition()); > map.zoomToMaxExtent(); > > My MapServer project is as follows: > > MAP > NAME Murcia > SIZE 800 600 > UNITS METERS > > EXTENT 544061.905938 4135608.106250 720849.906562 4288074.143750 > CONFIG PROJ_LIB "D:\Desarrollo\MapServer\proj\nad\" > PROJECTION > 'proj=longlat' > 'ellps=WGS84' > 'datum=WGS84' > 'no_defs' > '' > END > > IMAGECOLOR 192 192 192 > IMAGEQUALITY 95 > IMAGETYPE png > OUTPUTFORMAT > NAME png > DRIVER 'GD/PNG' > MIMETYPE 'image/png' > EXTENSION 'png' > END > > LEGEND > IMAGECOLOR 255 255 255 > STATUS ON > KEYSIZE 18 12 > LABEL > TYPE BITMAP > SIZE MEDIUM > COLOR 0 0 89 > END > END > > WEB > IMAGEPATH 'C:/Inetpub/tmp/' > IMAGEURL '/tmp/' > > METADATA > 'wms_title' 'Murcia' > 'wms_onlineresource' > > 'http://localhost/cgi-bin/mapserv.exe?map=D:/Desarrollo/MapServer/datos/ms_murcia_qgis_shp.map&; > > <http://localhost/cgi-bin/mapserv.exe?map=D:/Desarrollo/MapServer/datos/ms_murcia_qgis_shp.map&;> > > <http://localhost/cgi-bin/mapserv.exe?map=D:/Desarrollo/MapServer/datos/ms_murcia_qgis_shp.map&; > > <http://localhost/cgi-bin/mapserv.exe?map=D:/Desarrollo/MapServer/datos/ms_murcia_qgis_shp.map&;>>' > > > 'wms_srs' 'EPSG:4326' > END > > END > LAYER > NAME 'arquetas_otros_planifrega' > TYPE POINT > DATA > > 'D:\Desarrollo\MapServer\datos\CapasDePrueba\arquetas_otros_planifrega.shp' > METADATA > 'wms_title' 'arquetas_otros_planifrega' > END > STATUS DEFAULT > TRANSPARENCY 100 > PROJECTION > 'proj=longlat' > 'ellps=WGS84' > 'datum=WGS84' > 'no_defs' > '' > END > CLASS > NAME 'arquetas_otros_planifrega' STYLE > SYMBOL 'CIRCLE' SIZE 2 OUTLINECOLOR 0 0 0 > COLOR 31 2 3 > END > END > END > > SYMBOL > NAME 'CIRCLE' > TYPE ellipse > FILLED true > POINTS > 1 1 > END > END END > > The result is that the OpenLayers 'Murcia' layer shows no > data, and if left alone in the project only shows a gray > background. > > I've tried the same using QGis WMS client to Mapserver and > shows the data. > > żDo anybody knows how to solve the problem? > > Thanks a lot. > > -- > Saludos, > Toni Ramiro > <[email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>>> > <[email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>>> > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > [email protected] <mailto:[email protected]> > http://openlayers.org/mailman/listinfo/users > > > > -- > Alexandre Dubé > Mapgears > www.mapgears.com <http://www.mapgears.com> > > > > > -- > Saludos, > Toni Ramiro > <[email protected] <mailto:[email protected]>> > <[email protected] <mailto:[email protected]>> > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > [email protected] > http://openlayers.org/mailman/listinfo/users > -- Alexandre Dubé Mapgears www.mapgears.com _______________________________________________ Users mailing list [email protected] http://openlayers.org/mailman/listinfo/users
