Thanks Ran,
I now understand how I may plot it.
however this kind of feature is usefull, how may one suggest putting it
in the "wanted" feature list?
Niv
Randomthots wrote:
niv wrote:
hay lot,
I want to plot these results I got from several sensors in the lab.
Device / Time 10:24:00 10:24:00 10:24:00 10:24:00
10:24:00
TCT 0.933 1.020 1.143 1.249
1.368
23.500 25.000 29.000 31.500 34.000
TC6 0.934 1.081 1.261 1.421 1.589
23.000 27.000 31.000 35.500 39.000
TC GR 0.922 1.075 1.265 1.418 1.579
23.000 26.500 31.500 35.500 39.000
TC ind 0.944 1.130 1.302 1.464 1.644
23.500 28.500 32.500 36.000 41.000
TC iso 0.921 1.077 1.257 1.411 1.581
23.500 27.000 31.500 35.500 39.000
TC ex 0.920 1.073 1.256 1.417 1.587
23.500 27.000 31.500 35.500 39.000
thing is I want each sensor to have its own graph. so for example the
X axis for TCT is 23.5,25,29.. while the Y axis is 0.933,1.020,1.143...
didn't find a clue on how to achive this.
Thanks,
Niv
You can plot each series as a completely separate chart, but there is
no way AFAIK to plot independent X-Y series on the same chart.
To clarify further: You can chart several X-Y series on the same chart
BUT they cannot be completely independent. They will all have to share
the same X values. So if you had a series of sensor readings from
several sensors all taken at the same time you could plot all the
readings vs. time on the same chart.
Rod
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
