Another point. I use an HP Laserjet 1100. I had to lie to the printer
settings to get it to print properly. My printer loads from the center,
but I had to set it up to print as if the envelope was inserted on the
right.
Harold Fuchs wrote:
Christopher Elson wrote:
Hi
My problem is not so advanced as how to get the address positioned
correctly. I follow the process for creating an envelope as per the
Help guidance and it seems to work. Only problem is that when I print
the page nothing is printed. I am trying to print a DL envelope but
have been trying it with A4 paper as well to see if the problem is
one of positioning but whatever I put through is blank. I used the
"How to set up your system for Envelope Printing diagnostic kit" but
though both test pages load normally and are clear on screen the
printing-template.odt prints out fine but test-envelope.odt looks
right but prints completely blank.
Your thoughts would be welcome.
I am using an HP laserjet 1010 which gets on fine with all ther
programs and with Open Office except when doing this.
Chris Elson
a) Check the Help under Envelopes.
b) Check the documentation at
http://documentation.openoffice.org/HOW_TO/index.html under Envelopes
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
