On 08/11/2007 12:38 PM, NoOp wrote: > On 08/10/2007 06:13 PM, Charles Romans wrote: >> How do I change the space between lines to make it a smaller space. >> If I use 60 point type on one line and 18 point type on the next >> line, sometimes I want make it closer together. I have not been able >> to figure it out. I can make it bigger but not smaller. >> >> Thanks Chuck, >> > > I can't figure out a way to do it by format char/para. However, if it is > only an occasional line or two that you want to do this to for graphic > effect: > > 1. Select the entire 60 point line. Insert|Frame and that will convert > it to a frame. Adjust the size of the frame to only the size of the text > line, click on Borders and turn off bordering. > > 2. Do the same for the 18 point line. > > 3. Move the 18 point frame up into the 60 point frame & postion to how > you want them to appear. You can get the 18 point pretty close to the 60 > point text by doing this. > > Unfortunately I've not figured out select both frames so that they can > be grouped together if you want to move them as one.
Figured out that you can select the 18 point frame, then Format|Anchor|To Frame, and that will anchor it to the 60 point. Then you just have to play around resizing (turn off wrapping in the 60) etc and they can then be moved together. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
