On Tue, 2008-04-29 at 20:10 +0100, Harold Fuchs wrote: > On 29/04/2008 19:42, Craig White wrote: > > On Mon, 2008-04-28 at 09:15 -0700, Craig White wrote: > > > >> I'm using the Draw program to make a rather complicated flow chart and I > >> need to draw some connectors with multiple 90 degree turns (not just the > >> default 2 turns). Is there someway I can add new points into the path to > >> make a more complicated path? > >> > >> > > ---- > > one more try at this question... > > > > Craig > > > > > > > Don't know how to do what you want but back in the late sixties the man > who taught me to how to draw flowcharts taught me that if the lines > crossed then the logic was wrong. 40 years later, after earning a good > living designing and building software, I haven't found a counter > example ;-) ---- Thanks Harold...this isn't really a philosophical question or problem though...my problem is one supervisor with a lot of underlings that requires that I draw connectors to a lot of boxes where the navigation to fit this all on one sheet requires several turns (but no lines crossing).
Craig --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
