On 10/21/05 12:17, Ronald Wiplinger wrote:
Daniel-Constantin Mierla wrote:
Hello Ronald,
please use the init.d script to start/stop openser. You can find it
in packaging subdirectory, there are directories for different
distributions and inside of some is a file named openser.init.
Otherwise try starting it from command line:
/usr/local/sbin/openser -f /usr/local/etc/openser/openser.cfg
I used openserctl start and it seems it is different. With
your line above I could start openser in debug mode, however, there is
still no log file about it.
During startup and shutdown many lines flashed through the screen, as
well during CTRL C to stop it. While I try to use sipsak, there was
no extra line on the screen either.
Add log_stderror=yes in the configuration script and you should get all
the debug messages on the screen. Then watch when you send the sip
messages with sipsak.
I use SuSE, which init script should I use?
You have to use "packaging/rpm/openser.init.SuSE" - copy it in
/etc/init.d and you can use it all the time from there. Since I am not
using suse, I hope you do not have anything to change inside the file
(e.g., paths or names).
Cheers,
Daniel
bye
Ronald Wiplinger
Cheers,
Daniel
On 10/20/05 16:44, Ronald Wiplinger wrote:
Bogdan-Andrei Iancu wrote:
Hi,
this is rather strange - can you post the error messages generated
by openser at startup?? (see syslog)
With debug it DOES NOT START, no messages in /var/log/messages
It hangs at the line:
Starting OpenSER :
Without debug the only message during startup is:
Oct 20 21:41:00 vpbx /usr/local/sbin/openser[3882]: Maxfwd module-
initializing
bye
Ronald Wiplinger
regards,
bogdan
Ronald Wiplinger wrote:
Bogdan-Andrei Iancu wrote:
Hi Ronald,
to find why your authentication fails, run openser in debug mode
(debug=7) and look into the logs for hints. If you have doubts,
just post the log.
Hi,
with:
debug=7 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode */
fork=no
log_stderror=yes
/* */
in openser.cfg openser does not start at all.
The picture shows:
vpbx2:/usr/local/etc/openser # openserctl start
Starting OpenSER :
Thanks for your help!
bye
Ronald Wiplinger
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
