I become crazy to realize a serial forking.
I try to use load_contacts() and next_contscts().
This is my openser.cfg nd my location table:
In teory when I call [EMAIL PROTECTED] the location with the q value
equal to 0.80 it is the first but it is processed only the location
[EMAIL PROTECTED]
Help!!!
#
# $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=yes # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/openser_fifo"
#
# uncomment the following lines for TLS support
#disable_tls = 0
#listen = tls:your_IP:5061
#tls_verify = 1
#tls_require_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/openser/modules/mysql.so"
loadmodule "/usr/local/lib/openser/modules/sl.so"
loadmodule "/usr/local/lib/openser/modules/tm.so"
loadmodule "/usr/local/lib/openser/modules/rr.so"
loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
loadmodule "/usr/local/lib/openser/modules/usrloc.so"
loadmodule "/usr/local/lib/openser/modules/registrar.so"
loadmodule "/usr/local/lib/openser/modules/textops.so"
loadmodule "/usr/local/lib/openser/modules/avpops.so"
loadmodule "/usr/local/lib/openser/modules/xlog.so"
loadmodule "/usr/local/lib/openser/modules/lcr.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/openser/modules/auth.so"
loadmodule "/usr/local/lib/openser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("registrar", "append_branches", 1)
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("usrloc","db_url","mysql://openser:[EMAIL PROTECTED]/openser")
modparam("auth_db","db_url","mysql://openser:[EMAIL PROTECTED]/openser")
modparam("lcr","db_url","mysql://openser:[EMAIL PROTECTED]/openser")
modparam("avpops","avp_url","mysql://openser:[EMAIL PROTECTED]/openser")
modparam("avpops","avp_table","usr_preferences")
modparam("tm", "fr_timer", 8)
modparam("tm", "fr_inv_timer", 10)
modparam("tm", "wt_timer", 5)
#modparam("avpops","avp_aliases","fwdbusy=i:665")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
if (method =="INVITE" && uri =~"^sip:[EMAIL PROTECTED]"){
log(1, "Check 1 Start PSTN Call\n");
rewritehostport("192.168.9.97:5061");
t_relay();
exit;
}
if (method == "CANCEL"){
t_relay();
}
if (method =="BYE"){
t_relay();
}
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
#if(uri=~"@tls_domain1.net") {
# t_relay_to_tls("IP_domain1","port_domain1");
# exit;
#} else if(uri=~"@tls_domain2.net") {
# t_relay_to_tls("IP_domain2","port_domain2");
# exit;
#}
route(1);
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
if (!www_authorize("create-net.it", "subscriber")) {
www_challenge("create-net.it", "0");
exit;
};
save("location");
exit;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
if(load_contacts()){
xlog("L_ERR","LOAD CONTACTS!\n");
}
xlog("L_ERR","CONTACT <$ru> !\n");
t_on_failure("1");
t_relay();
#route(1);
}
route[1] {
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
exit;
}
failure_route[1] {
if (next_contacts()) {
xlog("L_ERR","NEXT CONTACT <$ru> !\n");
append_branch();
t_relay();
}
else {
xlog("L_ERR","ERROR!\n");
}
}
This is my location table
============================================================
username | domain | contact | q
400 | | sip:[EMAIL PROTECTED] | 1.00
308 | | sip:[EMAIL PROTECTED]:5060 | 1.00
309 | | sip:[EMAIL PROTECTED];transport=udp | 1.00
309 | | sip:[EMAIL PROTECTED] | 0.80
--
=======================================
Matteo Piazza, Junior Researcher
CREATE-NET
Via Solteri, 38 - 38100 Trento - Italy
email: [EMAIL PROTECTED]
Tel: +39-0461-408400ext:308
www.create-net.it
=======================================
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
