hi, Ramona,
you are right, i could select domain info from domain.
it sounds like check database is good choice for db_mode=2.
thanks from your hint.
Bests,
Bobber
Elena Ramona Modroiu wrote:
I have checked the sources and the fifo commands are enabled only when
db_mode parameter is set to 1 (caching mode). Otherwise when db_mode=0
(default value) the module uses the database everytime, so you can
look into domain table to see the list of domains.
Ramona
Mike Williams wrote:
Mine gives the same error, and I verified that I am using domains,
and that my domains are present in the database.
Is this working for anyone?
---Mike
-----Original Message-----
From: [EMAIL PROTECTED] on behalf of Bobber Cheng
Sent: Thu 1/5/2006 6:48 AM
To: [email protected]
Subject: [Users] 500 command 'domain_dump' not available
I use openser-1.0.0.
#/usr/local/sbin/openserctl domain show
500 command 'domain_dump' not available
i load domain.so in my openser.cf like
loadmodule "/usr/local/lib/openser/modules/domain.so"
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
