unplug wrote:
Thanks!
Below is the configuration file.
http://meerkat.no-ip.com/openser/openser.cfg
Do you mean line 165 cause the looping problem?
This should be fine. Put more xlog statements into your config and watch
syslog while making the INVITE/CANCEL. Then you will see how the CANCEL
will be routed by your proxy.
regards
klaus
On 1/23/06, Klaus Darilion <[EMAIL PROTECTED]> wrote:
Probably your routing logic is buggy and you are looping messages.
klaus
unplug wrote:
When UA1 makes a call to UA2, both ringing. Then UA1 cancels the
call, a strange log message (from ngrep) will be got below. After
that UA2 will ring 3 times itself. You can see in line 718, there is
a cancel method. After that, there are many Record-Route, Via in the
sip CANCEL method (line 763, line 1578 and many). Does anyone know
what the problem is?
http://meerkat.no-ip.com/openser/cancel.log
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
