Ramin Dousti wrote:
Hi Klaus,
It seems that forward_tcp() requires at least one argument. Any other
suggestions?
you can use:
forward_tcp(uri:host);
If you set the dst_uri via avpops, then it will have priority over
request uri.
Cheers,
Daniel
BTW, when you said "create a new URI and URI contains a transport=tcp
parameter" what part of the URI contains the transport protocol?
Ramin
On 1/26/06, Klaus Darilion <[EMAIL PROTECTED]> wrote:
Hi Ramin!
Please always cc to the list
Ramin Dousti wrote:
Thanks, Klaus.
Here is the full picture:
I receive a SIP URI "sip:[EMAIL PROTECTED]" on a UDP socket. The only thing I
need to do
is to proxy this session on a TCP socket to "dest".
I fugured I can do:
forward_tcp(dest);
But when I extract dest into an AVP, forwasrd_tcp does not work with an AVP as
its argument.
avp_printf("s:dst", "$td");
forward_tcp("s:dst");
it tries to resolve "s:dst" literally.
forward_tcp does not support pseudo variables.
try forward_tcp() without parameters.
regards
klaus
If the destination is stored in an AVP, use avp_pushto
(http://openser.org/docs/modules/1.0.x/avpops.html#AEN291) to push the
new URI into the request URI.
Then use t_relay (make sure the URI contains a transport=tcp parameter).
If the destination is static, use t_relay_to_tcp(ip, port)
http://openser.org/docs/modules/1.0.x/tm.html#AEN320
regards
klaus
Ramin Dousti wrote:
Hello,
I'm trying to forward a SIP message that's been received by UDP, to
$td through TCP. but the following configuration doesn't work:
send_tcp("$td", 5060 );
or
send_tcp($td, 5060 );
or
avp_printf("s:dst", "$td");
send_tcp("s:dst", 5060 );
Could you please help?
--
Ramin
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
--
Ramin
--
Ramin
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
