Hi Bogdan,
I applied your patch and got that results:
--- snip ---
[...]
0(0) xl_parse_format: format parsed OK: [4] items
0(0) fixing /lib/openser/modules/ record_route_preset
0(0) ***: str ptr=0x8129e50, str len=27, str s=0x8119a30 0(0) fixing
/lib/openser/modules/ xlog
0(0) xl_parse_format: parsing [$Tf: <$fu>;tag=$ft : record_route()
[...]
0(14144) xl_printf: final buffer length 125
0(14144) Fri Feb 3 00:23:20 2006:
<sip:[EMAIL PROTECTED]>;tag=etlg7wbdxp : record_route_preset(
"217.160.188.74:5060;nat=yes" )
0(14144) ***: str ptr=0x8129e50, str len=27, str s=0x8119a30 0(14144)
record_route_preset(): No memory left
0(14144) parse_headers: flags=200
[...]
0(14144) xl_printf: final buffer length 125
0(14144) Fri Feb 3 00:23:20 2006:
<sip:[EMAIL PROTECTED]>;tag=etlg7wbdxp : record_route_preset(
"217.160.188.74:5060;nat=yes" )
0(14144) ***: str ptr=0x8129e50, str len=27, str s=0x8119a30 0(14144)
record_route_preset(): No memory left
0(14144) parse_headers: flags=200
0(14144) DEBUG: get_hdr_body : content_length=297
0(14144) found end of header
0(14144) find_first_route: No Route headers found
[...]
--- snap ---
Regards
Bastian
Bogdan-Andrei Iancu schrieb:
Hi,
apply the attached patch and look for debug messages starting with
"***:" they should give us a clue about the len value...
Please send me the output (only that msgs).
regards,
bogdan
Bastian Schern wrote:
Hi,
I call record_route_present() directly from the script:
--- snip ---
#----------------------------------------------------------------
# record route section
#----------------------------------------------------------------
if( method == "INVITE" && client_nat_test( "3" ) ) {
xlog( "L_INFO", "$Tf: <$fu>;tag=$ft : record_route_preset(
\"217.160.188.74:5060;nat=yes\" )\n" );
record_route_preset( "217.160.188.74:5060;nat=yes" );
} else if( method != "REGISTER" ) {
xlog( "L_INFO", "$Tf: <$fu>;tag=$ft : record_route()\n" );
record_route();
}
--- snap ---
I don't see what's going wrong.
Regards
Bastian
Bogdan-Andrei Iancu schrieb:
Hi Bastian,
I made a fast overview/testing and I found no problem with
record_route_preset() function. Are you calling it directly from
script or from another module....the bogus length may by due an
invalid param.
regards,
bogdan
Bastian Schern wrote:
Hi Bogdan,
I compiled OpenSER with memory debugging and all other settings you
recommend to me. After that I got the following debug output:
--- snip ---
[...]
0(31223) xl_printf: final buffer length 125
0(31223) Wed Feb 1 00:31:43 2006:
<sip:[EMAIL PROTECTED]>;tag=77lh74wsus : record_route_preset(
"217.160.188.74:5060;nat=yes" )
0(31223) qm_malloc(0x8114d40, 32) called from data_lump.c:
anchor_lump(351)
0(31223) qm_malloc(0x8114d40, 32) returns address 0x815a390 frag.
0x815a378 (size=32) on 1 -th hit
0(31223) qm_malloc(0x8114d40, 1074638763) called from record.c:
record_route_preset(373)
0(31223) record_route_preset(): No memory left
0(31223) parse_headers: flags=200
[...]
--- snip ---
It looks like qm_malloc tries to allocate 1074638763 Bytes (1024 MB).
I think this is really strange!
In the memory dump I don't see something strange.
Regards
Bastian
Bogdan-Andrei Iancu schrieb:
Hi,
look like something is not right - please compile the memory debug
support (in Makefile.defs set DBG_QM_MALLOC define and remove
F_MALLOC - Note: you need to recompile everything).
run in no fork mode with debug=9 and wait for the error to appear.
first, see how much memory the malloc tries to grab.
second, hit the process with SIGUSR1 to force memory dump - see if
there is something strange there.
regards,
bogdan
Bastian Schern wrote:
Bogdan-Andrei Iancu schrieb:
Hi Bastian,
looks like you openser runs out of private memory (pkg memory) -
this may happen either because of insufficient mem, either due a
mem leak.
Does is happens after running for a long time? or quite soon
after start?
It will occur quite soon after starting OpenSER.
first try to increase the pkg memory - see config.h file, the
PKG_MEM_POOL_SIZE define. By default, the size is of 1 M. If the
problem persists, please report back.
I changed PKG_MEM_POOL_SIZE to 2*1024*1024 but it is still the
same. Is it still to low?
Regards
Bastian
regards,
bogdan
Bastian Schern wrote:
Hello to all,
I'm using the latest CVS 1_0_0 and I got the following message
in the log after a "record_route_preset(
"213.191.xxx.xxx:5060;nat=yes" )":
record_route_preset(): No memory left
Why this comes?
Regards
Bastian
____________
Virus checked by G DATA AntiVirusKit
Version: AVK 16.5183 from 30.01.2006
Virus news: www.antiviruslab.com
------------------------------------------------------------------------
? modules/rr/.record.c.swp
Index: modules/rr/record.c
===================================================================
RCS file: /cvsroot/openser/sip-server/modules/rr/record.c,v
retrieving revision 1.4
diff -u -r1.4 record.c
--- modules/rr/record.c 22 Nov 2005 12:35:30 -0000 1.4
+++ modules/rr/record.c 2 Feb 2006 14:01:58 -0000
@@ -329,6 +329,9 @@
char* hdr, *p;
int hdr_len;
+ DBG("***: str ptr=%p, str len=%d, str s=%p",((str*)_data),
+ ((str*)_data)->len, ((str*)_data)->s);
+
from = 0;
user.len = 0;
user.s = 0;
Index: modules/rr/rr_mod.c
===================================================================
RCS file: /cvsroot/openser/sip-server/modules/rr/rr_mod.c,v
retrieving revision 1.6
diff -u -r1.6 rr_mod.c
--- modules/rr/rr_mod.c 24 Jan 2006 20:56:27 -0000 1.6
+++ modules/rr/rr_mod.c 2 Feb 2006 14:01:58 -0000
@@ -170,6 +170,7 @@
s->s = (char*)*param;
s->len = strlen(s->s);
+ DBG("***: str ptr=%p, str len=%d, str s=%p",s,s->len,s->s);
*param = (void*)s;
}
____________
Virus checked by G DATA AntiVirusKit
Version: AVK 16.5261 from 02.02.2006
Virus news: www.antiviruslab.com
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
