First, let me cut the length of this e-mail... ;) Now, the only message that appears is the one that I sended You in the previous e-mail.
I played arround with the libradiusclient (file lib/sendserver.c) setting DIGEST_DEBUG (see a diff below) and recompile all stuff. Than I run openser with -TDdd and look the output. It shows me that the MD5 isn't equal. I try this after find this comments: http://lists.cistron.nl/pipermail/freeradius-users/2003-February/015851.html If it helps I can share an access to You in our server. Let me know about... Edson... ========================================================================= 23a24,25 > #define DIGEST_DEBUG 1 > 404a407,410 > #ifdef DIGEST_DEBUG > unsigned char *ptr=NULL; > #endif > 445c451 < rc_log(LOG_ERR, " %s", buf); --- > rc_log(LOG_ERR, " %s\n [%s]", buf,secret); ========================================================================= > -----Original Message----- > From: Daniel-Constantin Mierla [mailto:[EMAIL PROTECTED] > Sent: quarta-feira, 8 de março de 2006 16:26 > To: Edson > Cc: 'OpenSER (E-mail)' > Subject: Re: [Users] Radius Authentication > > Hello, > > On 03/07/06 04:16, Edson wrote: > > I run it, now with FreeRadius in debug mode (see results in attached > file), > > but nothing changed... I run with the two versions of radiusclient that > I > > have... > > > > Any idea? > > > I have seen that radius server returned authenticated, but the > libradiusclient-ng returns failure. You should get some error message in > the syslog file from libradiusclient-ng. > > I will set up a radius server and play with it in my environment. > > Cheers, > Daniel > > > Edson. > > > > PS: in attached file, You will find debug from OpenSER, FreeRadius and > logs > > from /var/log/message and > > /var/log/radius/radacct/127.0.0.1/reply-detail-20060306. _______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
