Hi Alessandro,
I would say it's a bug in softphone. have you tried with a different
one? xlite, kphone, minisip?
regards,
Bogdan
[EMAIL PROTECTED] wrote:
Hello Bogdan,
I made some more tests, and I realized that:
After registering my softphone (Express Talk) with user and password correct,
if I change the password with a wrong one,
the softphone registers anyway to openser. But if I shutdown
the softphone and I restart it with a wrong password, the registration is refused (error 401). So I am wandering whether
it is a softphone problem or a bug into openser. I have this doubt, because
changing the user with a non existent into db, softphone doesn't register to
openser even avoiding to shutdown the softphone. What do you think?
Thanks for your support...
Alessandro
---------- Initial Header -----------
From : "Bogdan-Andrei Iancu" [EMAIL PROTECTED]
To : "[EMAIL PROTECTED]" [EMAIL PROTECTED]
Cc : "users" [email protected]
Date : Wed, 15 Mar 2006 11:22:39 +0200
Subject : Re: [Users] openser and authentication
Hi Alessandro,
do you see any challenge from openser as a response to the REGISTER
requests? have you try the debug mode to get more info about what is
going one?
regards,
bogdan
[EMAIL PROTECTED] wrote:
Hello,
I am new with openser, and I am trying to figure out how to setup the
openser.cfg.
I've installed openser 1.1.0 with the db support. It works fine, infact I can
register softphones and have calls. The softphones are correctly registered
checking the username into Mysql db. I would like to check also the password,
and maybe the phone number, so I tried to enter the following parameter:
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
but it doesn't work, infact the softphones are anyway registered (it checks
only the username). Did I missed something in my configuration?
Thnaks a lot
Alessandro
PS. This is my openser.config (sorry for the long mail...):
# ----------- global configuration parameters --
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/openser_fifo"
# ------------------ module loading
loadmodule "/usr/local/lib/openser/modules/mysql.so"
loadmodule "/usr/local/lib/openser/modules/sl.so"
loadmodule "/usr/local/lib/openser/modules/tm.so"
loadmodule "/usr/local/lib/openser/modules/rr.so"
loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
loadmodule "/usr/local/lib/openser/modules/usrloc.so"
loadmodule "/usr/local/lib/openser/modules/registrar.so"
loadmodule "/usr/local/lib/openser/modules/textops.so"
loadmodule "/usr/local/lib/openser/modules/alias_db.so"
loadmodule "/usr/local/lib/openser/modules/auth.so"
loadmodule "/usr/local/lib/openser/modules/auth_db.so"
# ----------------- setting module-specific parameters -
modparam("usrloc", "db_url", "mysql://openser:[EMAIL PROTECTED]/openser")
modparam("usrloc", "db_mode", 2)
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("rr", "enable_full_lr", 1)
......
if (method=="REGISTER") {
if (!www_authorize("161.27.53.93", "subscriber")) {
www_challenge("161.27.53.93", "0");
exit;
};
save("location");
exit;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
};
......
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
