Probably the ACK is getting routing wrong. Analyze the SIP messages, to
which port they are sent (especially the ACK).
I have it running on additional port 6060 without any problems.
regards
klaus
unplug wrote:
Hi,
Can I add some more ports for openser other than 5060? Is there any
port range using in openser?
I have set one more port 6060 in my configuration file as below.
listen=IP:5060
listen=IP:6060
port=5060
children=4
Users using port 5060 is working fine. However, those users using
6060 will experience call drop around 1 minute after connection.
In the log from ngrep, I find message 408.
SIP/2.0 408 Request Timeout
It may the cause to drop the call. However, I have no idea why 6060
will get a call drop problem. Does it any other reason for it?
Thanks for help.
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
