Re: [Users] get_redirects("*"), serialize_branches(0), next_branches() not working for me

[Bogdan-Andrei Iancu]

Hi Greg,

first of all you should not use "status" statement in failure route - it 
was intended to be used only in reply route. In failure route it access 
only bogus date - you should use the t_check_status() from TM module

if you run in full debug, you will get additional logs about the 
processing of both get_redirects() and serialize_branches() - like what 
contacts are set as branches and later what branches are loaded as AVPs 
for serial fork.

regards,
Bogdan

Greg Fausak wrote:

I'm trying to play around with the current cvs head but can't get it to
work.  I wonder if somebody could give me a hint!


I built a redirect server:
It basically does:

rewritehost("ab5350.node-1.com");
sl_send_reply("302", "Redirect");

I forward to the redirect server setting up a failure block:

               if(is_method("INVITE"))
               {
                       _QLOG(L_INFO, OUTBOUNDCALL, OUT);

                       t_on_failure("3");

                       record_route();
                       setflag(1);
                       setflag(2);

                       rewritehostport(_QSTR
(REDIRECTOBGATEWAYIP:REDIRECTOBGATEWAYPORT));

                       if(!t_relay())
                       {
                               sl_reply_error();
                       }
               }

The response below comes back from my redirect server:

SIP/2.0 302 Redirect
Via: SIP/2.0/UDP 12.46.104.47;branch=z9hG4bKa86.09801851.0
Via: SIP/2.0/UDP 12.46.104.62:5061;branch=z9hG4bKa86.191c2c81.0
Via: SIP/2.0/UDP 12.46.104.59;branch=z9hG4bKa86.dafc0771.0
Via: SIP/2.0/UDP 71.252.176.37:5060;branch=z9hG4bK-d0702751
From: +19722200434 <sip:[EMAIL PROTECTED]>;tag=3a553a2b9373c699
To: <sip:[EMAIL PROTECTED]>;tag=5531b0101f56e37a4889ece4b0eb40fa.417f
Call-ID: [EMAIL PROTECTED]
CSeq: 101 INVITE
Contact: sip:[EMAIL PROTECTED]:5060
Content-Length: 0

My failure_route block picks up the routing:

failure_route[3]
{
       _QLOG(L_WARN, FAILUREROUTE, here we are);

       if(status =~ "3[0-9][0-9]")
       {
               _QLOG(L_WARN, FAILUREROUTE, status is 3xx);
               get_redirects("*");
               serialize_branches(0);
       }
       if(next_branches())
       {
               _QLOG(L_WARN, FAILUREROUTE, next branch);
               t_on_failure("3");
               t_relay();
       }
       _QLOG(L_WARN, FAILUREROUTE, no branches left);
       if(!t_reply("404", "Not Found"))
       {
               _QLOG(L_WARN, FAILUREROUTE, Error);
       }
}

My syslog shows QLOG messages.
I see the 'status is 3xx' message, which shows the
next command to be get_redirects("*");

The next output I see in my syslog is 'no branches left', which
indicates that the
serialize_branches(0) and next_branches() aren't working as I expected.

I've also tried getting rid of the serialize_branches and 
next_branches and just
doing a t_relay() after the get_redirects(), that doesn't work either.

Since I'm trying to simulate the redirect server, and the redirect
client, I'm sure I
got one of them wrong.  Can somebody give me a hint?

Thanks!

-g





_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users