Bogdan, I finally managed to upload the memory dumps to pastebin. Links are: Hopefully you can access them.
Memory dump right after OpenSER was started: http://pastebin.com/723872 Memory dump after OpenSER running for 20min: http://pastebin.com/723890 Memory dump after OpenSER running for 50min: http://pastebin.com/723902 The problem started to occur between the 20 and 50 minute samples. About 20 calls had been processed in that time. Douglas. > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 21, 2006 10:14 AM > To: Douglas Garstang > Cc: [email protected] > Subject: Re: [Users] Out of Memory > > > As written in the wiki, if you do not know how to interpret > the result, > you should post them on a ftp or http server and send the link to the > list - also, important is to mention in which context did you get the > mem dump - is the shutdown dump, a run time dump... > > regards, > bogdan > > > Douglas Garstang wrote: > > >Once I get the memory status, how do I interpret the results? > > > > > > > >>-----Original Message----- > >>From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] > >>Sent: Wednesday, June 21, 2006 9:43 AM > >>To: Douglas Garstang > >>Cc: [email protected] > >>Subject: Re: [Users] Out of Memory > >> > >> > >>Hi Douglas, > >> > >>it was signal SIGUSR1 and not SIGHUP - I strongly advice you > >>to go through > >> http://openser.org/dokuwiki/doku.php?id=memory > >>note you have to recompile and reinstall in order to be able to do > >>memory debug. > >> > >>also does not matter how much mem. your system has - openser > >>will use by > >>default only 1M per process. Refer to the wiki for how to > increase it. > >> > >>Regards, > >>Bogdan > >> > >> > >> > > _______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
