Mark, I think that is what Klaus was suggesting.
First, copy the 'To' URI into an AVP (this holds the value) Then, copy the AVP to the RURI (request URI). It's a two step process. I agree with Klaus, this is weird :-) But, entirely doable. -g On 7/31/06, Mark Anthony C. Delfin <[EMAIL PROTECTED]> wrote:
Hello Klaus, Thanks for the reply. Is it possible to rewrite the request URI based from the TO header for calls to be forwarded there? On 7/31/06, Klaus Darilion <[EMAIL PROTECTED]> wrote: > Hi Mark! > > First, routing based on the To header violates the RFC3261, and is > usually an indicator that either your setup or your SIP hardware is > non-optimal. > > If you still want to do it, you can copy the URI in the To header in an > AVP (check the list of available pseudo variables, there is a pseudo > variable for the To URI I guess) with avp_write. Then push this AVP into > the request URI using avp_pushto. > > regards > klaus > > Mark Anthony C. Delfin wrote: > > Hello Guys, > > > > Just like to request assistance in trying to figure out how can I route > > the call from SER as seen on TO header. Below is the snippet of the sip log: > > > > > > 0(20457) DEBUG: get_hdr_field: <To> [34]; uri=[ > > sip:[EMAIL PROTECTED]:8700] > > 0(20457) DEBUG: to body [<sip:[EMAIL PROTECTED]:8700> > > ] > > 0(20457) get_hdr_field: cseq <CSeq>: <1154241348> <INVITE> > > 0(20457) DEBUG:maxfwd:is_maxfwd_present: value = 70 > > 0(20457) DBG:maxfwd:process_maxfwd_header: value 70 decreased to 16 > > 0(20457) check_via_address(10.10.10.21 <http://10.10.10.21>, > > 10.10.10.21 <http://10.10.10.21>, 0) > > 0(20457) Sending: > > INVITE sip:[EMAIL PROTECTED] <mailto:sip:[EMAIL PROTECTED]> SIP/2.0 > > Via: SIP/2.0/UDP 10.10.10.86 <http://10.10.10.86 >;branch=0 > > Via: SIP/2.0/UDP 10.10.10.21 <http://10.10.10.21> > > ;branch=z9hG4bK13666f91365343 > > From: <sip:[EMAIL PROTECTED]>;tag=cba-0094-44cc5343 > > To: <sip:[EMAIL PROTECTED]:8700> > > Call-ID: [EMAIL PROTECTED] > > <mailto: [EMAIL PROTECTED]> > > CSeq: 1154241348 INVITE > > Contact: <sip:[EMAIL PROTECTED] <mailto:sip: [EMAIL PROTECTED]>> > > Date: Sun, 30 Jul 2006 06:35:47 GMT > > User-Agent: BRSIP v2.0.0.11 > > Max-Forwards: 16 > > Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, SUBSCRIBE, NOTIFY > > Allow-Events: keep-alive, message-summary > > Supported: timer > > Session-Expires: 1800 > > Min-SE: 600 > > Expires: 300 > > Content-Type: application/sdp > > Content-Length: 220 > > > > v=0 > > o=BRSDP 177 177 IN IP4 10.10.10.21 <http://10.10.10.21> > > s=BRSDP Session > > c=IN IP4 10.10.10.21 <http://63.116.254.21 > > > t=0 0 > > m=audio 15000 RTP/AVP 4 18 101 > > a=rtpmap:4 G723/8000 > > a=rtpmap:18 G729/8000 > > a=rtpmap:101 telephone-event/8000 > > a=fmtp:101 0-15 > > > > I need SER to send the call based on the TO HEADER URI seen on > > get_hdr_field. This value changes depending on what another sip proxy is > > sending to the SER. The t_relay is not working as i like it to behave. > > Any help is greatly appreciated. Thanks in advance. > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Users mailing list > > [email protected] > > http://openser.org/cgi-bin/mailman/listinfo/users > > _______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
-- Greg Fausak [EMAIL PROTECTED] _______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
