Hi, It doesn't work, with the 'c' flag all the c= tags remain unchanged.
-----Original Message----- From: Ovidiu Sas [mailto:[EMAIL PROTECTED] Sent: Thursday, August 03, 2006 5:00 PM To: Pletli Antal Cc: [email protected] Subject: Re: [Users] Two c= tag in sdp body Check the new 'c' flag in 1.1 release: http://www.openser.org/docs/modules/1.1.x/nathelper.html#AEN275 -ovi On 8/3/06, Pletli Antal <[EMAIL PROTECTED]> wrote: > > > > Hello, > > I use OpenSer with Cisco AS5300/5350/5400 with IOS 12.3. > When Cisco sends an OK 200 SIP message to OpenSer, there are two "c=IN IPV4" > tags in sdp body with the same IP address. > The nathelper module only replaces the last occurence of c= tag so > some SIP clients works wrong because those get the first IP from the first "c=" > tag... > > How can i replace the all occurences of "c=" tag in sdp body with the > help of nathelper? > > Thx, > > Antal > > Content-Type: application/sdp. > Content-Length: 277. > . > v=0. > o=CiscoSystemsSIP-GW-UserAgent 7144 773 IN IP4 213.253.220.242. > s=SIP Call. > c=IN IP4 213.253.xxx.xxx. -> this is the original address of Cisco GW > t=0 0. > m=audio 35944 RTP/AVP 18. > c=IN IP4 213.253.xxx.yyy. -> this is the nated address replaced by > nathelper > a=rtpmap:18 G729/8000. > a=fmtp:18 annexb=no. > m=video 35946 RTP/AVP. > c=IN IP4 213.253.220.253. > a=nortpproxy:yes. > _______________________________________________ > Users mailing list > [email protected] > http://openser.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
