Gerd Feiner wrote:
Federico Giannici schrieb:
I'm trying to install rtpproxy. It usually works, but there are some
cases that don't work.
For example, when a Cisco PSTN gateway is called, RTP traffic is
proxied in one direction only. I think the problem is in the handling
of the reply received from the gateway: it have two "c" lines but only
one is modified.
your problem is most likely not caused by openser but a misconfigured
gateway. do you have ip-routing enabled or just set an ip
defautl-gateway? if so, try enablind ip routing (ip routing) and set an
appropriate default route (ip route 0.0.0.0 0.0.0.0 x.x.x.x).
The gateway is not managed by me, but by one of the greatest VoIP
operators here in Italy.
Anyway, I solved the problem making my proxy to modify all "c" lines...
Bye.
--
___________________________________________________
__
|- [EMAIL PROTECTED]
|ederico Giannici http://www.neomedia.it
___________________________________________________
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
