Hello,
On 10/11/06 17:08, Cseke Tamas wrote:
Hi,
i use both setfalg(x), and acc_rad_request
i need accounting for INVITE, ACK (for INVITE), CANCEL, BYE
it was working ubkess error, but now i try failed_transaction flag.
Could you help me in some better solution,
I need acc_rad_request becasue of i need invite accounting immediately
- for set the call setuptime
ack - for set the call connecttime
bye - for disconnecttime
So i done it this way:
(config in question)
modparam("acc", "radius_flag", 1)
modparam("acc", "radius_missed_flag", 2)
modparam("acc", "failed_transaction_flag", 4)
if (is_method("ACK") || is_method("BYE")) {
use here:
if(is_method("ACK|BYE"))
it is better for performance.
You do not need to set failed_transaction_flag for ACK since it does not
get a reply, so cannot get in that situation.
You have to set report_ack and report_cancels parameters of acc module, see:
http://www.openser.org/docs/modules/1.1.x/acc.html
Cheers,
Daniel
setflag(1);
setflag(2);
setflag(4);
};
# accounting requests
if (is_method("INVITE")) {
if (!radius_www_authorize("$rd")) {
www_challenge("$rd", "0");
exit;
};
acc_rad_request("200 Invite received...");
consume_credentials();
}
else if (is_method("ACK")) {
if (t_check_status("[4-6][0-9][0-9]")) {
acc_rad_request("Failed");
}
else {
acc_rad_request("200 Ack received...");
};
}
else if (is_method("BYE")) {
}
else if (is_method("CANCEL")) {
acc_rad_request("200 CANCEL received...");
};
Thanks,
Tamas
raviprakash sunkara wrote:
Can U send the Config
U didn't set the flags properly in ur Config file
and
Don't use setflag("x");
Use acc_rad_request("200");
On 10/11/06, Cseke Tamas <[EMAIL PROTECTED]> wrote:
Hi,
When sends openser accounting packets for INVITE, and BYE message?
it seems to be, when received 200 OK.
1)for INVITE i need radius packet immediately, not just when it was
answered.
2)for BYE i need accounting packet, when any error occured too.
modparam("acc", "radius_flag", 2)
modparam("acc", "radius_missed_flag", 3)
this attribute mean that, should sent radius packet, when any error
occured too, isn't it? However openser don't send accounting packet in
this case.
i run into the following error:
##########
T called -> openser
BYE sip:21.16.8.92:5060
##
T openser->called
SIP/2.0 477 Unfortunately error on sending to next hop occurred
(477/TM)
##########
T caller->openser
BYE sip:[EMAIL PROTECTED]:5060;
#####
# openser -> caller
SIP/2.0 481 Call Leg/Transaction Does Not Exist..
So no 200 OK for BYE received, therefore no accounting packet to radius
sent.
How can i solve these problems?
Btw, what could cause this 477 error?
Thanks,
Tamas
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
