Hi Marnus,
I'm not really sure that we are talking about the same problem, at least it
doesn't seems to be. Because in my case the nat_test returned that the UA was
nated; in other case my script wouldn't send it to the MediaProxy (Server).
Until that moment everything worked fine. But when that UA started sending
it's RTP flow, MediaProxy cought it from the nated address and relayed It to
the UA's original IP address.
What about the other call party...? Simply nothing.
Thanks for your comments,
Víctor
----- Original Message -----
From: Marnus van Niekerk
To: Victor
Cc: [email protected]
Sent: Tuesday, November 28, 2006 6:21 PM
Subject: Re: [Users] MediaProxy and Nated Public IP
We had a similar problem with a UA that discovers it own public IP and puts
that into the Contact header instead of the pvt IP.
Make sure you disable STUN and any other public IP discovery such as ICE in
the UA otherwise mediaproxy module does not know it is behind NAT.
M
Victor wrote:
Hi all,
I've got some problems with the MediaProxy.
I found a UAC with a Public IP that reaches my SIP Server through a
NAT. Then the MediaProxy receives the RTP flow from the NAT's IP address, and
relay the same flow to the real UAC's IP address (that is public too).
What about the RTP flow sent by the other party? MediaProxy just
ignores it.
Anybody knows why is the MediaProxy acting that way?
Thanks in advance,
Víctor
----------------------------------------------------------------------------
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
__________ Informacie NOD32, revisi887 (20061128) __________
Este mensaje ha sido analizado con NOD32 antivirus system
http://www.nod32.com
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
