Thanks for the info - I've updated the docs.
regards
klaus
Christian Schlatter wrote:
Klaus Darilion wrote:
Hi Christian!
Is the behavior identically for all transactions or is there a
difference between INVITE and other transactions?
>> - INVITE transactions: FRT initially equals fr_timer and gets set to
>> fr_inv_timer after receiving first provisional response
This is only true for INVITE transactions, all other transactions only
use the fr_timer. This makes sense since INVITE transactions normally
involve user interaction (ringing).
The code responsible for that is in /modules/tm/t_reply.c,
reply_received(..) function:
/* update FR/RETR timers on provisional replies */
if (msg_status < 200 && (restart_fr_on_each_reply ||
((last_uac_status<msg_status) &&
((msg_status >= 180) || (last_uac_status == 0)))
) ) { /* provisional now */
if (is_invite(t)) {
/* invite: change FR to longer FR_INV, do not
* attempt to restart retransmission any more
*/
backup_list = set_avp_list(&t->user_avps);
if (!fr_inv_avp2timer(&timer)) {
DBG("DEBUG:tm:reply_received:
FR_INV_TIMER = %d\n", timer);
set_timer(&uac->request.fr_timer,
FR_INV_TIMER_LIST, &timer);
t->flags |= T_NOISY_CTIMER_FLAG;
} else {
set_timer(& uac->request.fr_timer,
FR_INV_TIMER_LIST, 0);
}
set_avp_list(backup_list);
} else {
/* non-invite: restart retransmissions (slow
now) */
uac->request.retr_list = RT_T2;
set_timer(&uac->request.retr_timer, RT_T2, 0);
}
} /* provisional replies */
- Christian
regards
klaus
Christian Schlatter wrote:
Ovidiu Sas wrote:
Hi Klaus,
You can use the fr_timer from the tm module:
http://openser.org/docs/modules/1.1.x/tm.html#AEN108
If you don't get any reply from the far end, this timer will fire.
I recently had a look at the timer related source code and that is
what I wrote down:
- Each SIP transaction has a final response timer (FRT)
- SIP transactions fail (failure_route, status 408) when FRT fires
- TM module exposes final response timers (FRT) fr_timer and
fr_inv_timer (can be set using AVP)
- INVITE transactions: FRT initially equals fr_timer and gets set to
fr_inv_timer after receiving first provisional response
- setting fr_timer to a low value (e.g. 3s) allows for fast INVITE
failover
So I'm setting fr_timer to a low value for local INVITE transactions.
Local here means sessions between endpoints from our network domain.
Something along the lines:
route[0] {
if (method==“INVITE”) {
# set fr_timer to 3 seconds
avp_write("i:3", "$avp(fr_timer)");
# call FAILURE_DEFAULT_RELAY routing block on transaction
failure
t_on_failure("FAILURE_DEFAULT_RELAY");
t_relay();
exit; }
}
failure_route[FAILURE_DEFAULT_RELAY] {
# status 408 ? transaction timed out
if (t_check_status("408")) {
# try next target
if (ds_next_domain()) {
t_relay();
}
}
}
- Christian
Regards,
Ovidiu Sas
On 12/18/06, Klaus Darilion <[EMAIL PROTECTED]> wrote:
Hi!
i wonder if there is a timer which controls the timeout for
provisional
replies.
E.g. I want to cancel an INVITE and retry another gateway if the
gateway
does not respond with 100 (or 180) in a certain time.
regards
klaus
--
Klaus Darilion
nic.at
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
------------------------------------------------------------------------
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
--
Klaus Darilion
nic.at
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
