Hello,
i'm sure that the recompiled module is running :-(
what happens is that OpenSER answer to the 407 message with a new INVITE
containing authentication information (and this is right)
but the other server (an Alcatel OmniPCX) doesn't like it and answer
with another 407.
maybe it's because OpenSER doesn't insert in the "Proxy-Authorization"
Header the qop="auth" parameter?
username and password are set correctly and i use static credential in
openser.
here are the interesting messages (193.205.139.139 is OpenSER, i've
skipped ACK and Trying messages):
U 193.205.139.139:5060 -> 172.16.2.10:5060
*INVITE* sip:[EMAIL PROTECTED]:5060 SIP/2.0.
Record-Route: <sip:193.205.139.139;lr=on;ftag=1583161212>.
Via: SIP/2.0/UDP 193.205.139.139;branch=z9hG4bK16d1.3552d5a7.0.
Via: SIP/2.0/UDP
193.205.218.107:5060;rport=5060;branch=z9hG4bK3C00C0185E8A4E4584E24BF53D8D552E.
From: 089 <sip:[EMAIL PROTECTED]>;tag=1583161212.
To: <sip:[EMAIL PROTECTED]>.
Contact: <sip:[EMAIL PROTECTED]:5060>.
Call-ID: [EMAIL PROTECTED]
CSeq: 23670 INVITE.
Max-Forwards: 69.
Content-Type: application/sdp.
User-Agent: X-Lite release 1105x.
Content-Length: 309.
.
v=0.
o=089 1687151 1687164 IN IP4 193.205.218.107.
s=X-Lite.
c=IN IP4 193.205.139.139.
t=0 0.
m=audio 50240 RTP/AVP 0 8 3 98 97 101.
a=rtpmap:0 pcmu/8000.
a=rtpmap:8 pcma/8000.
a=rtpmap:3 gsm/8000.
a=rtpmap:98 iLBC/8000.
a=rtpmap:97 speex/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=sendrecv.
U 172.16.2.10:65471 -> 193.205.139.139:5060
*SIP/2.0 407 Proxy Authentication Required.*
Proxy-Authenticate: Digest
qop="auth",nonce="753d3031565dc070588bc6723fba3dae",realm="172.16.2.10".
To: <sip:[EMAIL PROTECTED]>;tag=aabbc0f292583150372f16081d1513a4.
From: 089 <sip:[EMAIL PROTECTED]>;tag=1583161212.
Call-ID: [EMAIL PROTECTED]
CSeq: 23670 INVITE.
Via: SIP/2.0/UDP 193.205.139.139;branch=z9hG4bK16d1.3552d5a7.0.
Via: SIP/2.0/UDP
193.205.218.107:5060;rport=5060;branch=z9hG4bK3C00C0185E8A4E4584E24BF53D8D552E.
Content-Length: 0.
U 193.205.139.139:5060 -> 172.16.2.10:5060
*INVITE* sip:[EMAIL PROTECTED]:5060 SIP/2.0.
Record-Route: <sip:193.205.139.139;lr=on;ftag=1583161212>.
Via: SIP/2.0/UDP 193.205.139.139;branch=z9hG4bK16d1.3552d5a7.1.
Via: SIP/2.0/UDP
193.205.218.107:5060;rport=5060;branch=z9hG4bK3C00C0185E8A4E4584E24BF53D8D552E.
From: 089 <sip:[EMAIL PROTECTED]>;tag=1583161212.
To: <sip:[EMAIL PROTECTED]>.
Contact: <sip:[EMAIL PROTECTED]:5060>.
Call-ID: [EMAIL PROTECTED]
CSeq: 23670 INVITE.
Max-Forwards: 69.
Content-Type: application/sdp.
User-Agent: X-Lite release 1105x.
Content-Length: 309.
Proxy-Authorization: Digest username="xxxxxxx", realm="172.16.2.10",
nonce="753d3031565dc070588bc6723fba3dae",
uri="sip:[EMAIL PROTECTED]:5060",
response="0f2d0fe3296f6c93f9f6fd4a05206567", algorithm="MD5".
.
v=0.
o=089 1687151 1687164 IN IP4 193.205.218.107.
s=X-Lite.
c=IN IP4 193.205.139.139.
t=0 0.
m=audio 50240 RTP/AVP 0 8 3 98 97 101.
a=rtpmap:0 pcmu/8000.
a=rtpmap:8 pcma/8000.
a=rtpmap:3 gsm/8000.
a=rtpmap:98 iLBC/8000.
a=rtpmap:97 speex/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=sendrecv.
U 172.16.2.10:65471 -> 193.205.139.139:5060
*SIP/2.0 407 Proxy Authentication Required.*
Proxy-Authenticate: Digest
qop="auth",nonce="753d3031565dc070588bc6723fba3dae",realm="172.16.2.10".
To: <sip:[EMAIL PROTECTED]>;tag=50234ce96a2fb0581f63689873e105f0.
From: 089 <sip:[EMAIL PROTECTED]>;tag=1583161212.
Call-ID: [EMAIL PROTECTED]
CSeq: 23670 INVITE.
Via: SIP/2.0/UDP 193.205.139.139;branch=z9hG4bK16d1.3552d5a7.1.
Via: SIP/2.0/UDP
193.205.218.107:5060;rport=5060;branch=z9hG4bK3C00C0185E8A4E4584E24BF53D8D552E.
Content-Length: 0.
*thank you very much for your help!*
Stefano
Andreas Heise ha scritto:
Hello,
are you sure the your recompiled uac modul is running instead the old
one ? Try to add a debug line like following to be sure....
case QOP_STATE:
/* TODO - add qop support */
LOG(L_WARN,"INFO: qop detected and ignored ;-) \n");
break;
what happens exactly? Tried your OpenSER to send a new INVITE with PA
header
or is the 407 was relayed to the caller? A ngrep trace would be helpful
regards,
Andreas
Stefano Capitanio schrieb:
Hi,
i have the same problem authenticating with a server that respond
with qop="auth".
i modified auth_hdr.c:
case QOP_STATE:
/* TODO - add qop support */
break;
then i recompiled the module with
make modules=modules/uac modules
and copied "uac.so" to /usr/local/lib/openser/modules/uac.so
and restarted openser
but it doesn't work!
I've tried also with:
case QOP_STATE:
/* TODO - add qop support */
auth->qop = val;
break;
have I made any mistake?
thanks for your help,
Stefano
Andreas Heise ha scritto:
Thomas Gelf schrieb:
Same problem here. As I make intensive use of uac_auth() and need to
authenticate against Proxies sending me the qop parameter in their
authentication challenge, in the meantime I helped myself by simply
commenting out the "goto error" section in modules/uac/auth_hdr.c.
I just changed
case QOP_STATE:
/* TODO - add qop support */
LOG(L_ERR,"ERROR:uac:parse_authenticate_body: no
qop support "
"for the moment :-(\n");
goto error;
auth->qop = val;
break;
to
case QOP_STATE:
/* TODO - add qop support */
break;
somewhere around line 215.
I already used this "fix" to ignore the qop value and from my opinion
it should be OK if qop=auth, because the result of the digest should
be the same for qop = "auth" or unspecified see page 14 in the
following draft of an example
http://www.softarmor.com/wgdb/docs/draft-smith-sip-auth-examples-00.txt
but! by this way the Authenticated Request from OpenSER does not
contains qop="auth" in the response which is maybe a problem for
some gateways.
Sure, that's not the way things should be solved - but at the moment
it fits my needs. And as of RFC 2617 I should be fine - not sure about
RFC3261. Section 22.4(.8) states that "the 'qop' parameter must unfor-
tunately remain optional for clients and servers to receive" - so imo
it should be ok. (?)
To be sincere I did never REALLY understand this whole qop thingy.
Afaik
OpenSER isn't able to increment cseq in it's UAC module as this module
doesn't have any dialog support. And in my believes that's why the UAC
module has been designed to fail if it recieves a challenge containing
qop (because it isn't able to do it the right way).
I believe that the fail is wanted to be able to forward the 401|407
to the
calling client which is maybe able to answer a challenge which
contains qop
Nonetheless with my little "patch" everything "just works":
-> UAC module sends an INVITE request
-> remote sends it's 407 message, containing nonce and qop (but no
cnonce)
-> 407 gets acknowledged
-> UAC module ignores the qop (as error handling is commented out) and
sends a new INVITE request with the correct nonce (and is therefore
doing correct digest authentication) but with wrong cseq (eg same
cseq as previous INVITE = cseq supplied from client)
but the response does not contains the chosen qop value
-> remote party (proxy asking for authentication) accepts my INVITE
I'm doing so since AVP support has been added to uac_auth() - see also
http://www.openser.org/pipermail/devel/2006-March/002162.html and it
worked fine with all versions of OpenSER I compiled since this date.
It would be great if (unless cseq incrementation support will once be
added to UAC) upstream sources could comment out this section (as I
showed above).
I don't see any grave issues in doing so - and it would probably help
people who need this feature. Would such a modification be an
option for
OpenSER 1.2? You could also add an optional swich like
> modparam("uac","ignore_qop",1);
I think we can save the time to build a modparam, this time could be
better used
for a final solution, because it's still not working with
qoq="auth-int" or qop="auth-int, auth"
and if it's really needed everybody can uncomment and compile it self.
I found an answer from Bogdan in the devel list that the cseq and qop
limits will not be removed with 1.2
http://www.mail-archive.com/[email protected]/msg04951.html
but I hope in the next roadmap for 1.3 it can be changed for
optional to
todo to get this feature......
Please let me know if you like my proposal or if I'm talking
bullshit :)
no it's not bullshit ;-) as the problem is really old.......
regards,
Andreas
Kind regards,
Thomas Gelf
Andreas Heise schrieb:
Hello,
since a lot of providers has change there authentication to
qop="auth"
the uac_auth(); function of the uac module can't use anymore.
by google I found a lot of requests for qop with uac_auth and also
the official feature request 1345887.
Is a target date known for a solution, maybe it's possible with
1.2.0?
Feature Request [ 1345887 ] Implement qop functionality in uac module
p.s.: I know it's on the road map, but it is needed so often......
thanks.
Andreas
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
