Hi Bogdan,
Could you confirm what i have done here is correct please?
route[5] {
if (search("From:.*<sip:090[0-9]{5}")) {
uac_replace_from("anonymous","sip:[EMAIL PROTECTED]");
remove_hf("Remote-Party-ID");
append_hf("Remote-Party-ID: \"Anonymous\"
<sip:[EMAIL PROTECTED]>;party=calling;screen=yes;privacy=full\r\n");
rewritehostport("gatewayip:5060");
route(1);
}
I have used uac_replace_from just incase sip header not contain rpid.
Regards,
Howard
On 2/8/07, Bogdan-Andrei Iancu <[EMAIL PROTECTED]> wrote:
Hi Howard,
in this case is simple. If RPID hdr is used you don not have to change
the FROM hdr anymore.
To replace the RPID hdr, use remove_hf() see textops module to remove
the hdr and append_hf() to add a new one.
regards,
bogdan
Howard Tang wrote:
> Hi Bogdan,
>
> After I check the sip message, I think the problem is
>
> Remote-Party-ID: 1234 <sip:[EMAIL PROTECTED]>;screen=yes;party=calling
>
> I can see the uac_replace_from has changed the From Header, but i
> think the problem was caused by the Remote-Party-ID on the Linksys ATA
>
> Is there a way to change this Remote-Party-ID as well?
>
> Regards,
> Howard
>
> On 2/7/07, Bogdan-Andrei Iancu <[EMAIL PROTECTED]> wrote:
>> yes :)
>>
>> regards,
>> bogdan
>>
>> Howard Tang wrote:
>> > HI Bogdan,
>> >
>> > do you means using " ngrep -t -W byline port 5060 " ?
>> >
>> > regards,
>> > Howard
>> >
>> >
>> > On 2/7/07, Bogdan-Andrei Iancu <[EMAIL PROTECTED]> wrote:
>> >> Hi Howard,
>> >>
>> >> could please post the network trace of a non-working call?
>> >>
>> >> regards,
>> >> bogdan
>> >>
>> >> Howard Tang wrote:
>> >> > HI All,
>> >> >
>> >> > I have a problem with uac_replace_from() function not working for
>> >> > Linksys Unit.
>> >> >
>> >> > This is what i have in the route[1],
>> >> >
>> >> > if (search("From:.*<sip:900*")) {
>> >> >
>> uac_replace_from("anonymous","sip:[EMAIL PROTECTED]");
>> >> > }
>> >> >
>> >> > I have 0900xx as internal sip account, then I have to remove the
>> >> > 0900xx callerid before i send the call to PSTN gateway. Because
>> 0900xx
>> >> > is not a valid number, Mobile phone providers block the call
>> because
>> >> > of that, as a result, I need to replace the callerid to anonymous.
>> >> >
>> >> > I have tested with many other ATA and X-Lite without problem. The
>> >> > problem only ocurrs when i use Linksys ata. I have monitored the
>> SIP
>> >> > message, the first request will change to anonymous then back to
>> the
>> >> > original username.
>> >> >
>> >> > Anyone have an idea on how i can fix this ?
>> >> >
>> >> >
>> >>
>> >>
>> >
>>
>>
>
--
Howard Tang
ICQ : 259083
MSN : [EMAIL PROTECTED]
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
