You should keep cc-ing mailing lists, so people coming after a while,
with same issue, will be reading mail thread and see that the given
solution was right.
Thanks,
Daniel
On 03/20/07 21:42, Tim Madorma wrote:
> Got it. thanks so much!
>
> Tim
>
> On 3/20/07, Daniel-Constantin Mierla <[EMAIL PROTECTED]> wrote:
>> Hello,
>>
>> On 03/20/07 17:39, Tim Madorma wrote:
>> > Hi,
>> >
>> > I have put the OpenSER version 1.2 behind a BIG IP load balancer
which
>> > provides a static private IP address (10.1.1.20) via NAT to the
>> > OpenSER. In our application, the clients will send to one of the
three
>> > public addresses that are defined as aliases:
>> >
>> > alias="65.185.232.62:5061"
>> > alias="65.185.232.62:5062"
>> > alias="65.185.232.62:5063"
>> you have to remove quotes around the value of alias parameters. As
it is
>> now, the value between quotes is considered to be hostname.
>> alias=65.185.232.62:5061
>> alias=65.185.232.62:5062
>> alias=65.185.232.62:5063
>>
>> Same case as it was reported by Juha, today with loose routing ...
>>
>> Cheers,
>> Daniel
>>
>> >
>> > An incoming OPTIONS message is received with the host in the REQ URI
>> > set to 65.185.232.62:5063 is received and when it hits this
section of
>> > openser.cfg:
>> >
>> > if (!uri==myself) {
>> > # mark routing logic in request
>> > append_hf("P-hint: outbound\r\n");
>> > route(1);
>> > };
>> >
>> > it executes within the if conditional and tries to route the OPTIONS
>> > message. I am wondering why uri does not match myself. The debug
>> > output from the log is as follows (it seems that the alias
assignments
>> > are not working):
>> >
>> >
>> > Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug]
>> > grep_sock_info - checking if host==us: 13==9 && [65.185.232.62]
== [1
>> > 0.1.1.20]
>> > Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug]
>> > grep_sock_info - checking if port 5061 matches port 5063
>> > Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug]
>> > grep_sock_info - checking if host==us: 13==9 && [65.185.232.62]
== [1
>> > 0.1.1.20]
>> > Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug]
>> > grep_sock_info - checking if port 5062 matches port 5063
>> > Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug]
>> > grep_sock_info - checking if host==us: 13==9 && [65.185.232.62]
== [1
>> > 0.1.1.20]
>> > Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug]
>> > grep_sock_info - checking if port 5063 matches port 5063
>> > Mar 19 16:41:11 homer openser[2267]: [ID 140248 local0.debug]
>> > DEBUG:check_self: host != me
>> >
>> >
>> > Any suggestions? I have not tried this in any other version. Is
this a
>> > possible bug in 1.2?
>> >
>> > thanks,
>> > Tim
>> >
>> > _______________________________________________
>> > Users mailing list
>> > [email protected]
>> > http://openser.org/cgi-bin/mailman/listinfo/users
>> >
>>
>
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
