Hi Andreas, Did you set the received_avp in the NATHelper-/Registrar-Module? It is no longer set per default like in the 1.1-Versions:
"Note: You must set this parameter if you use "fix_nated_register". In such case you must set the parameter with same name of "registrar" module to same value." http://openser.org/docs/modules/1.2.x/nathelper.html#AEN119 Carsten Am Donnerstag, den 22.03.2007, 21:58 +0100 schrieb Andreas Granig: > Hi, > > When migrating my config from 1.1 to 1.2, far-end NAT traversal doesn't > work anymore. Here is what I do: > > modparam("usrloc", "nat_bflag", 6) > ... > # register handling: > if(!search("^Contact:[ ]*\*") && nat_uac_test("19")) > { > xlog("L_INFO", "NATed REGISTER\n"); > fix_nated_register(); > setbflag(6); > } > if(!save("location")) > { > # error handling > ... > } > > The log message is printed, so NAT is detected. The received-column in > the DB also shows the correct NAT-address, but the flag-column is always > 0. Any advice? > > Regards, > Andreas > > This e-mail is confidential and may well also be legally privileged. If you > have received it in error, you are on notice of its status. Please notify us > immediately by reply e-mail and then delete this message from your system. > Please do not copy it or use it for any purposes, or disclose its contents to > any other person: to do so could be a breach of confidence. Thank you for > your cooperation. > Information pursuant to paragraph 14 Austrian Companies Code: UPC Austria > GmbH; Registered Office: Wolfganggasse 58-60, 1120 Vienna Company Register > Number: FN 189858d at the Commercial Court of Vienna > > _______________________________________________ > Users mailing list > [email protected] > http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
