Hello,
On 03/26/07 19:12, Toni Barata wrote:
Hi Daniel,
Increasing the children from 4 to 16 did turn into same results (I was already using debug=3 and fork=yes).
But setting debug=0 did real turn in much better results.
looks like lot of syslog messages are printed. Can you check if your
syslog is set asynchronous for openser?
Cheers,
Daniel
Thanks a lot,
Toni
-----Original Message-----
From: Daniel-Constantin Mierla [mailto:[EMAIL PROTECTED]
Sent: segunda-feira, 26 de Março de 2007 16:53
To: Toni Barata
Cc: [email protected]
Subject: Re: [Users] load testing presence server
Hello,
if you use exactly the same config, then turn debug to a lower level
(e.g., 3), set fork=yes and children to 16 for better results.
Cheers,
Daniel
On 03/26/07 18:48, Toni Barata wrote:
Hi Anka,
In a scenario using Openser as a Presence Sever (using the config file
example located in
http://openser.org/dokuwiki/doku.php/presence:configuration-file), the
execution of load tests (with sipp) with Subscribe Presence WInfo had
as result a maximum of 20 sessions per second (We are using a Intel(R)
Xeon(TM) CPU 3.00GHz with 2GB RAM), with lots of retransmissions if we
increase to values bigger than 20 (Openser dos not crash). Is there
any configurable parameter in the Presence module that allows
increasing this value?
Best regards,
Toni
------------------------------------------------------------------------
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
