Thanks Terry But now there is a Problem (I just reported either). When I run openser with fork=yes, it crashes!
I have an open thread which begun by reporting an issue about openser crashin when compiled on 64 bits; right now it is running compiled on 32 bits, but, when it is started with for=yes, it crashes. This is the URL of the report. http://openser.org/pipermail/users/2007-March/010035.html Thanks! On 3/29/07, Terry Robert <[EMAIL PROTECTED]> wrote:
I experienced the same problem with the SNMPstats module. If you run openser in foreground mode (fork=no), the module doesn't initialize. Running in background mode fixes the problem. ---------- Forwarded message ---------- From: "Sergio Gutierrez" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Date: Thu, 29 Mar 2007 10:59:26 -0500 Subject: Re: Fwd: [Users] SNMPstats module not returning data Hi Jeffrey, This is the log of the agent when is started in debug mode, and later Openser is started: /opt/net-snmp/sbin/snmpd -f -Dagentx -x tcp:localhost:705 2>&1 No log handling enabled - turning on stderr logging registered debug token agentx, 1 agentx_register_app_config_handler: registering .conf token for "agentxsocket" agentx_register_app_config_handler: registering .conf token for "agentxperms" agentx_register_app_config_handler: registering .conf token for "agentxRetries" agentx_register_app_config_handler: registering .conf token for "agentxTimeout" Turning on AgentX master support. agentx/master: initializing... agentx/master: initializing... DONE NET-SNMP version 5.4 agentx/master: unexpected callback op 4 agentx/master: handle pdu (req=0x54fb3d2b,trans=0x0,sess=0x0) agentx/master: open 0018efc0 agentx/master: opened 001ad130 = 5 with flags = a0 agentx/master: send response, stat 0 (req=0x54fb3d2b,trans=0x0,sess=0x0) agentx_build: packet built okay I have tried changing too the keywork agentXsocket to agentXSocket, and with a minimal snmpd config, and still reports error: # /opt/net-snmp/bin/snmpwalk -v 2c -c public localhost .1.3.6.1.4.1.27483 OPENSER-REG-MIB::openser = No Such Object available on this agent at this OID And the snmpd log: agentx/master: send response, stat 0 (req=0x54fb3d2f,trans=0x0,sess=0x0) agentx_build: packet built okay agentx/master: handle pdu (req=0x54fb3d30,trans=0x0,sess=0x5) agentx/master: send response, stat 0 (req=0x54fb3d30,trans=0x0,sess=0x5) agentx_build: packet built okay Thanks! On 3/29/07, Jeffrey Magder <[EMAIL PROTECTED] > wrote: > > It looks like there is communication going on between the NetSNMP master > agent, and OpenSER's SNMPStats sub-agent. Would you be able to provide > me some more of the /var/log/snmpd.log snmpd logs? Specifically, I'm > looking for what happens after: > > Turning on AgentX master support. > agentx/master: initializing... > agentx/master: initializing... DONE > NET-SNMP version 5.3.1 > > There should be something similar to the following: > > agentx/master: unexpected callback op 4 > agentx/master: handle pdu (req=0x1da53a0c,trans=0x0,sess=0x0) > agentx/master: open 0x81137c8 > agentx/master: opened 0x814b558 = 6 with flags = a0 > agentx/master: send response, stat 0 (req=0x1da53a0c,trans=0x0,sess=0x0) > > > If thats there, I'm wondering if you have set up any special view > restrictions for certain parts of the OID Tree given a certain community > strings? > Perhaps it would be helpful to rule that out with a minimal snmpd.conf > file containing only: > > rocommunity public > master agentx > > Finally, I don't think this matters (it doesn't matter on my system), > but could you change: > > agentXsocket tcp:localhost:705 ---> agentXSocket tcp:localhost:705 > > The "S" wasn't capitalized. :-) > > Thanks again! > > - Jeffrey Magder > > Sergio Gutierrez wrote: > > Hi Jefrey > > > > Thanks for your answer. > > > > I will reply every point: > > > > # /opt/net-snmp/bin/snmpwalk -v 2c -c community localhost > > .1.3.6.1.4.1.27483 > > OPENSER-REG-MIB::openser = No Such Object available on this agent at > > this OID > > > > # ps -ef | grep snmpd > > root 1649 579 0 17:50:07 pts/2 0:17 > > /opt/net-snmp/sbin/snmpd -d -f -Dagentx -x tcp:localhost:705 > > root 2935 2778 0 09:59:21 pts/3 0:00 grep snmpd > > (I am running debug mode; the syntax of ps command is a little bti > > different because I am using Solaris) > > > > # grep -i agentx /var/log/snmpd.log > > agentx_build: packet built okay > > agentx/master: handle pdu (req=0x3ac55fdb,trans=0x0,sess=0xf) > > agentx/master: send response, stat 0 > (req=0x3ac55fdb,trans=0x0,sess=0xf) > > agentx_build: packet built okay > > agentx/master: handle pdu (req=0x3ac55fdc,trans=0x0,sess=0xf) > > agentx/master: send response, stat 0 > (req=0x3ac55fdc,trans=0x0,sess=0xf) > > agentx_build: packet built okay > > agentx/master: handle pdu (req=0x3ac55fdd,trans=0x0,sess=0xf) > > agentx/master: send response, stat 0 > (req=0x3ac55fdd,trans=0x0,sess=0xf) > > agentx_build: packet built okay > > ... > > > > # cat /opt/net-snmp/share/snmp/snmpstats.conf > > agentXsocket tcp:localhost:705 > > > > # cat /opt/net-snmp/share/snmp/snmpd.conf > > syslocation XXXX > > syscontact XXXX > > agentaddress udp:161 > > rocommunity community localhost > > master agentx > > > > As you can see, both of the files are located at the same directory. > > > > Finally, I do have tried the check. I can see Openser starts OK and > > the master agent receives the connection of the sub agent. > > > > Thank you very much for your help. > > > > Kind regards. > > > > Sergio G. > > > > > > > > > > > > On 3/29/07, *jmagder* < [EMAIL PROTECTED] > > <mailto: [EMAIL PROTECTED]>> wrote: > > > > Hi Sergio, > > > > First off, could you try running "/opt/net-snmp/bin/snmpwalk -v 2c > -c > > community sipserver .1.3.6.1.4.1.27483"? If that isn't > succeeding, > > then it would greatly help me debug your problem if you could > > answer the > > following questions: > > > > 1) What is the output of "ps aux | grep snmpd"? > > > > 2) What is the output of "cat /var/log/messages | grep AgentX" > > > > 3) Can you show me the contents of snmpstats.conf ? > > > > 4) Does snmpd.conf contain "master agentx"? > > > > 5) Is snmpd.conf located in the same directory as snmpstats.conf? > > > > 6) Have you tried the steps in "Testing for a proper > > Configuration" in > > section 1.6.4? > > > > Thanks Sergio! > > > > - Jeffrey Magder > > > > Sergio Gutierrez wrote: > > > Hi list. > > > > > > I have installed Openser 1.2.0, with Net-snmp version 5.4 to > support > > > the SNMPstats module. I have configured the subagent according > to > > the > > > instructions on the documentation, but I am not being able to > obtain > > > any data. > > > > > > I am running both products on Solaris 10 Sparc. > > > > > > # /opt/net-snmp/bin/snmpwalk -v 2c -c community sipserver > > > .1.3.6.1.4.1.27483.3.1.1.1.1.1.1 > > > SNMPv2-SMI::enterprises.27483.3.1.1.1.1.1 = No Such Object > available > > > on this agent at this OID > > > > > > # /opt/net-snmp/bin/snmpwalk -v 2c -c community sipserver > > > openserSIPProtocolVersion > > > SNMPv2-SMI::enterprises.27483.3.1.1.1.1.1 = No Such Object > available > > > on this agent at this OID > > > > > > Is there any other thing I should do after compiling and > > configuring? > > > > > > Thanks in advance for your attention > > > > > > Kind Regards. > > > > > > Sergio Gutiérrez > > > > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > > > Users mailing list > > > [email protected] <mailto: [email protected]> > > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > > _______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
