Hi Andy,
if I understand correctly, you want the same functionality, but with
per-register controllability, right?
regards,
bogdan
杨冬 wrote:
hi, Ovidiu:
I know your meaning, but I don't want to change the value for
normal client REGISTER message which is not behind a NAT device. For a
REGISTER request, if it is tested to be behind a NAT device with
client_nat_test, then I want to change the value of reply. Can u give
some more suggestions?
Thanks very much!
andy.yang
2007/04/10
2007/4/10, Ovidiu Sas <[EMAIL PROTECTED]>:
Hi Andy,
You don't need to rewrite the reply message. Just set the value that
you want:
http://www.openser.org/docs/modules/1.2.x/registrar.html#AEN103
Best Regards,
Ovidiu Sas
On 4/9/07, 杨冬 <[EMAIL PROTECTED]> wrote:
> hi, all:
> I want to make a client to send the REGISTER update message in a
> short time, which is used to prevent the NAT device to close the port
> for the client. So I want to rewrite the reply message for REGISTER
> and change the expire parameter to a value of my setting. How can I
> achieve this?
> Thanks.
>
>
> andy.yang
>
> 2007/04/10
>
> _______________________________________________
> Users mailing list
> [email protected]
> http://openser.org/cgi-bin/mailman/listinfo/users
>
------------------------------------------------------------------------
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
