Can anyone recommend any good softphone for windows with which i can test presence. kumar
On 6/21/07, KUMAR <[EMAIL PROTECTED]> wrote:
Thank you Dave, That cleared a lot of things. kumar On 6/21/07, Dave Waiting <[EMAIL PROTECTED]> wrote: > Hi Kumar > > Unfortunately I don't have Eyebeam, so I'm not sure if it even supports > XCAP, although from what I've heard it does. Maybe someone else can give > you some guidance as to what settings need to be changed. > > I think there is some confusion as to how XCAP works. > > XCAP uses HTTP to retrieve and send documents to an XCAP server. This > may or may not be located on the same machine as your SIP Presence > server. As far as I know OpenSER only deals with SIP messages and > therefore does not support the XCAP protocol. That's why you need XCAP-lite. > > The confusing part is that the OpenSER presence module can look at XML > pres-rules documents that were obtained by the XCAP server and make > presence decisions based on these documents. But OpenSER does not deal > with the XCAP protocol itself, only the resulting XML documents. > > XCAP-lite uses Apache to listen for incoming HTTP GET and PUT requests. > Your client (eyebeam) must send the XML pres-rules documents using HTTP > to the XCAP server (probably listening on port 80) and not to the SIP > presence server (probably listening on port 5060). > > So the openser.cfg file should not be consulted for XCAP requests, only > for SIP PUBLISH and SUBSCRIBE presence requests. It looks to me like > eyebeam is trying to set the pres-rules using SIP not XCAP and that is > why it's not recognizing the event type. (Your openser.cfg file looks > fine by the way.) > > Regards > > Dave > > > > KUMAR wrote: > > Hi Dave, > > Where do I need to change the settings, in Eyebeam or in Openser.cfg. > > I couldnt find any setting in the Eyebeam to make such change. As for > > my configuration file, i am attaching it alongwith. > > Thank you > > kumar > > > > On 6/21/07, Dave Waiting <[EMAIL PROTECTED]> wrote: > >> > >> Now that I look a little closer it seems that Eyebeam is trying to > >> either get or set your pres-rules using a SIP SUBSCRIBE. > >> > >> The XCAP protocol (and the XCAP-lite server) uses HTTP GET and PUT > >> methods to set and retrieve the pres-rules documents. Try change your > >> settings to use XCAP rather than SIP to change your pres-rules. > >> > >> Hope this helps. > >> > >> > >> Dave Waiting wrote: > >> > Hi Kumar > >> > > >> > As far as I am aware the presence module adheres to RFC3856 and > >> > RFC3857. Therefore the only valid event types would be: > >> > > >> > Event: presence > >> > > >> > and > >> > > >> > Event: presence.winfo > >> > > >> > It seems strange that Eyebeam does not follow this syntax. Perhaps > >> > there is a setting you can change. > >> > > >> > Regards > >> > > >> > Dave > >> > > >> > > >> > > >> > KUMAR wrote: > >> >> Hi all, > >> >> I am using openser 1.2.1-notls (i386/linux), with eyebeam configured > >> >> to use XCAP, and i sitll get the same error > >> >> > >> >> PRESENCE: handle_subscribe:Missing or unsupported event header field > >> >> value > >> >> 2(12452) PRESENCE:handle_subscribe: ERROR occured > >> >> 2(12452) WARNING: script writer didn't release transaction > >> >> > >> >> The packet capture shows that the Events field in the SUBSCRIBE have > >> >> Event: ua-profile;profile-type=application;auid="pres-rules" > >> >> > >> >> Anyone please help me out. I really need to get this working. > >> >> regards > >> >> kumar > >> >> > >> >> > >> >> On 6/20/07, Klaus Darilion <[EMAIL PROTECTED]> wrote: > >> >>> > >> >>> > >> >>> KUMAR wrote: > >> >>> > About XCAP server, I am using XCAP simulator from > >> >>> > (http://download.dns-hosting.info/XCAP/). What i want to know is, > >> >>> do i > >> >>> > need to give the address of XCAP server in the openser.cfg, > >> >>> > >> >>> no > >> >>> > >> >>> > or is it > >> >>> > automatically used by the presence module. > >> >>> > >> >>> no > >> >>> > >> >>> The XCAP server is only used by the client - e.g. eyebeam. > >> >>> > >> >>> regards > >> >>> klaus > >> >>> > >> >> > >> >> _______________________________________________ > >> >> Users mailing list > >> >> [email protected] > >> >> http://openser.org/cgi-bin/mailman/listinfo/users > >> >> > >> > > >> > > >> > >> > >
_______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
