Zitat von Markus Hardiyanto <[EMAIL PROTECTED]>:
does openvz can use the swap partition on the host server for the VE
inside it? because i have 2GB RAM and 2GB swap on the host server,
then setup 2 VE with 1GB guaranteed RAM and 1.5GB burstable RAM for
each VE.
it seems that if the 2 VE burst the RAM usage more than 2GB in
total, the host didn't use its swap partition to accommodate the
burst need as I check the swap partition is always show 0
is it true that i can't use the host swap as RAM for VE? in other
word 2GB RAM + 2GB swap != 4GB memory can be allocated for VEs?
Best Regards,
Markus
The VE can use the memory supplied by the hardware node. It does not
matter if the HW node uses RAM or SWAP beside performance. If the HW
node does not use SWAP you simply have not *used* but maybe only
reserved more then 2GB in sum (HW-node + VE). You can check
/proc/meminfo on the HW-node to see how much of your RAM is used.
Regards
Andreas
--
All your trash belong to us ;-) www.spamschlucker.org
To: [EMAIL PROTECTED]
_______________________________________________
Users mailing list
[email protected]
https://openvz.org/mailman/listinfo/users
