Hello to all,
I want to make a CT to host a samba server, I made a veth for the CT
and I
bridged it to the CT0 interface, I also added the routes inside CT and CT0 as
described in the wiki.
But I'm not able to see samba exports of other hosts inside CT nor to
export
any directory. The network is working, so the problem should be the broadcast
packets.
CT0 and CT are Debian Lenny box, this is the configuration:
r...@ct0:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1c:c0:9f:cf:16
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21c:c0ff:fe9f:cf16/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:746467 errors:0 dropped:0 overruns:0 frame:0
TX packets:242150 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:564033915 (537.9 MiB) TX bytes:49129374 (46.8 MiB)
Memory:e0400000-e0420000
venet0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:28024 errors:0 dropped:0 overruns:0 frame:0
TX packets:25955 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:27407115 (26.1 MiB) TX bytes:29518379 (28.1 MiB)
veth104.0 Link encap:Ethernet HWaddr 00:18:51:23:cb:85
inet6 addr: fe80::218:51ff:fe23:cb85/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:638 errors:0 dropped:0 overruns:0 frame:0
TX packets:6139 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:132000 (128.9 KiB) TX bytes:234087 (228.6 KiB)
vzbr0 Link encap:Ethernet HWaddr 00:18:51:23:cb:85
inet6 addr: fe80::218:51ff:fe23:cb85/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4640 errors:0 dropped:0 overruns:0 frame:0
TX packets:11116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:356763 (348.4 KiB) TX bytes:16536447 (15.7 MiB)
r...@ct0:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.55 * 255.255.255.255 UH 0 0 0 vzbr0
localnet * 255.255.255.0 U 0 0 0 eth0
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
r...@ct0:~# brctl show
bridge name bridge id STP enabled interfaces
vzbr0 8000.00185123cb85 no veth104.0
CT4:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.0.2.1 * 255.255.255.255 UH 0 0 0 venet0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
default 192.0.2.1 0.0.0.0 UG 0 0 0 venet0
CT4:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:51:17:10:04
inet addr:192.168.1.55 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::218:51ff:fe17:1004/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6139 errors:0 dropped:0 overruns:0 frame:0
TX packets:638 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:234087 (228.6 KiB) TX bytes:132000 (128.9 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1178 errors:0 dropped:0 overruns:0 frame:0
TX packets:1178 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:159490 (155.7 KiB) TX bytes:159490 (155.7 KiB)
venet0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0
Mask:255.255.255.255
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Anybody knows why I can see samba exports (using "smbtree" for example)?
Thanks,
--
_______________________________________________
Users mailing list
[email protected]
https://openvz.org/mailman/listinfo/users
