Now you mention it, I think I remember reading about that before. The cpuunits is really just a matter of percentages, isn't it? If I understand right you could just as well start with a value of 100 for a server and then in this case assign 67 (as 2/3) to this VE, and re remaining 33 to remaining VE's. That would accomplish the same as setting this VE to ~1390000 (2/3 of ~2085000) and use the remaining ~694000 for remaining VE's -- right?
On Sat, Jun 14, 2014 at 7:23 AM, Kir Kolyshkin <k...@openvz.org> wrote: > Short answer: vzcpucheck was written a long time ago, when the trees were > big and CPUs were small. Just divide the numbers it show by say 10 and > you'll be fine. > > On Jun 13, 2014 9:27 AM, "Rene C." <ope...@dokbua.com> wrote: >> >> I have a server with 12 cores and vzcpucheck reports following "power >> of the node": >> [root@server16 ~]# vzcpucheck >> Current CPU utilization: 646833 >> Power of the node: 2085210 >> >> Essentially I want to allow one container 2/3 of the power of this >> hardware node but if I set the value of --cpuunits to more than 500000 >> it throws the error >> >> [root@server16 ~]# vzctl set 1602 --save --cpus 8 --cpulimit 800 >> --cpuunits 500001 >> Bad parameter for --cpuunits: 500001 >> >> Setting it to 500000 works fine: >> >> [root@server16 ~]# vzctl set 1602 --save --cpus 8 --cpulimit 800 >> --cpuunits 500000 >> Setting CPU limit: 800 >> Setting CPU units: 500000 >> Setting CPUs: 8 >> CT configuration saved to /etc/vz/conf/1602.conf >> >> What am I misunderstanding here? >> _______________________________________________ >> Users mailing list >> Users@openvz.org >> https://lists.openvz.org/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > _______________________________________________ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users
