Thanks a lot Tim, I'm going to go to see the information...
Greetings from another side of this world -Pablo On Thu, Aug 14, 2014 at 1:55 AM, Timh Bergström <t...@shiwebs.net> wrote: > I'm not sure how to do this with RH-style network configuration, but we've > done this successfully on multiple Debian/Ubuntu based OpenVZ hosts for > years, basically - we create the bonding interface first, native bond0 have > no VLAN-tag which we then use as 'vmbr0', and then we add logical > bridge-interfaces with vlan's to the bonding interface and use those for > bridges when creating guests, however this has only worked with veth so far. > > Please see the following link for an example: http://pastebin.com/ECHTwtfr > > This is a Debian 6.0.4 installed with a 2.6.32-kernel with OpenVZ > > Good luck! > //T > > On 2014-07-29 23:25, Pablo Silva wrote: > >> Dear colleagues, I would like to work with the following scheme in openvz >> >> We want deploy multiple vlan over a bonding, so far I have read the >> documentation openvz, but I can not reach the target >> >> I would like to share with you, my settings and analyze that I was >> wrong. I leave the settings via pastebin to not obstruct the reading >> >> Thanks in advance >> Pablo >> >> http://pastebin.com/CGAk4bGY >> >> >> >> >> _______________________________________________ >> Users mailing list >> Users@openvz.org >> https://lists.openvz.org/mailman/listinfo/users >> >> > -- > //T > >
_______________________________________________ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users