Hello! I found bug! Thx Maxim Patlasov for helping with ploop v1 BAT format.
Please check version from git and it support ploop v1 and v2 correctly :) On Sun, Sep 14, 2014 at 2:15 AM, Pavel Odintsov <pavel.odint...@gmail.com> wrote: > Thank you for report, its very useful for investigation. But only one > difference between v1 and v2 is ploop disk size in header (32 vs 64 bit). > But I use 64 bit numbers anywhere and everything should work fine. But I > suppose alignment issues which not handled in my tool. > > > On Friday, September 12, 2014, Roman Haefeli <reduz...@gmail.com> wrote: >> >> On Fri, 2014-09-12 at 11:15 +0200, Roman Haefeli wrote: >> > On Fri, 2014-09-12 at 10:56 +0200, Roman Haefeli wrote: >> > > Hi Pavel >> > > >> > > I might have some more information on the issue. It seems that only >> > > 'old' ploop images cannot be mounted by ploop_userspace. I actually >> > > don't quite know the ploop version I used for creating the 'old' ploop >> > > images, but I know it works well with images created with ploop v1.6. >> > > >> > > Does ploop_userspace know about older image formats? >> > >> > No, it's also not the version. >> >> Yes, there are different versions... I must have checked on the wrong >> machine. ploop_userspace works well with images created by ploop v1.11, >> but not with images created by ploop v1.6. >> >> Sorry for the noise. >> >> Roman >> >> >> >> > >> > > On Thu, 2014-08-28 at 22:53 +0400, Pavel Odintsov wrote: >> > > > Hello! >> > > > >> > > > No, it's not depend on kernel version. I created issue for you and >> > > > will try to investigate: >> > > > https://github.com/FastVPSEestiOu/ploop_userspace/issues/10 please >> > > > track this github issue. >> > > > >> > > > On Thu, Aug 28, 2014 at 6:12 PM, Roman Haefeli <reduz...@gmail.com> >> > > > wrote: >> > > > > Some more info: >> > > > > >> > > > > It works on our test cluster where we have >> > > > > 2.6.32-openvz-042stab093.4-amd64 installed. The report from below >> > > > > is >> > > > > from a host node running 2.6.32-042stab081.3-amd64. >> > > > > >> > > > > Is ploop_userspace dependent on kernel version? >> > > > > >> > > > > Roman >> > > > > >> > > > > >> > > > > On Thu, 2014-08-28 at 15:59 +0200, Roman Haefeli wrote: >> > > > >> Hi Pavel >> > > > >> >> > > > >> Your tool comes in handy. That is exactly what we'd need. >> > > > >> However, I had >> > > > >> troubles using it. I did: >> > > > >> >> > > > >> $ ploop_userspace >> > > > >> /virtual/.snapshot/nightly.0/vz/private/2006/root.hdd/root.hdd >> > > > >> >> > > > >> We process: >> > > > >> /virtual/.snapshot/nightly.0/vz/private/2006/root.hdd/root.hdd >> > > > >> Ploop file size is: 4193255424 >> > > > >> version: 1 disk type: 2 heads count: 16 cylinder count: 81920 >> > > > >> sector count: 2048 size in tracks: 20480 size in sectors: 41943040 >> > > > >> disk in >> > > > >> use: 1953459801 first block offset: 2048 flags: 0 >> > > > >> For storing 21474836480 bytes on disk we need 20480 ploop >> > > > >> blocks >> > > > >> We have 1 BAT blocks >> > > > >> We have 262128 slots in 1 map >> > > > >> Number of non zero blocks in map: 3998 >> > > > >> Please be careful because this disk used now! If you need >> > > > >> consistent backup please stop VE >> > > > >> !!!ERROR!!! We can't found GPT table on this disk >> > > > >> !!!ERROR!!! We can't find ext4 signature >> > > > >> Set device /dev/nbd0 as read only >> > > > >> Try to found partitions on ploop device >> > > > >> First ploop partition was not detected properly, please call >> > > > >> partx/partprobe manually >> > > > >> You could mount ploop filesystem with command: mount -r -o >> > > > >> noload /dev/nbd0p1 /mnt >> > > > >> >> > > > >> >> > > > >> Despite the errors, I tried to mount the ploop-partition: >> > > > >> >> > > > >> $ mount -r -o noload /dev/nbd0p1 /mnt/ >> > > > >> >> > > > >> and got: >> > > > >> >> > > > >> mount: special device /dev/nbd0p1 does not exist >> > > > >> >> > > > >> Apparently, ploop_userspace wasn't able to read the GPT partition >> > > > >> table. >> > > > >> >> > > > >> Tell me, if you need further information. >> > > > >> >> > > > >> Thanks, >> > > > >> Roman >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> On Tue, 2014-08-19 at 12:48 +0400, Pavel Odintsov wrote: >> > > > >> > Hello! >> > > > >> > >> > > > >> > You can mount ploop from RO root.hdd images with my tool: >> > > > >> > https://github.com/FastVPSEestiOu/ploop_userspace but it's not >> > > > >> > stable >> > > > >> > now. You can try it and provide feedback. >> > > > >> > >> > > > >> > On Tue, Aug 19, 2014 at 12:24 PM, Roman Haefeli >> > > > >> > <reduz...@gmail.com> wrote: >> > > > >> > > Hi all >> > > > >> > > >> > > > >> > > At the university I work, we plan to switch all containers >> > > > >> > > from simfs to >> > > > >> > > ploop images on the long run. Despite the many advantages of >> > > > >> > > using >> > > > >> > > ploop, there is one major drawback that keeps us from >> > > > >> > > switching >> > > > >> > > production already now: We can't mount ploop images from >> > > > >> > > read-only >> > > > >> > > snapshots. In case of a recovery of a single file, we have to >> > > > >> > > copy the >> > > > >> > > ploop image from the read-only snapshot to some read-write >> > > > >> > > storage in >> > > > >> > > order to be able to mount it and extract the file. For CTs >> > > > >> > > with huge >> > > > >> > > ploop-images this is a big hurdle. >> > > > >> > > >> > > > >> > > Wouldn't it be possible to add a some flag to the 'ploop' >> > > > >> > > utility to >> > > > >> > > allow mounting ploop images from read-only storage (by >> > > > >> > > bypassing some >> > > > >> > > checks or skipping to set the dirty flag or whatever is >> > > > >> > > necessary)? >> > > > >> > > >> > > > >> > > Cheers, >> > > > >> > > Roman >> > > > >> > > >> > > > >> > > >> > > > >> > > _______________________________________________ >> > > > >> > > Users mailing list >> > > > >> > > Users@openvz.org >> > > > >> > > https://lists.openvz.org/mailman/listinfo/users >> > > > >> > >> > > > >> > >> > > > >> > >> > > > >> >> > > > >> >> > > > > >> > > > > >> > > > > _______________________________________________ >> > > > > Users mailing list >> > > > > Users@openvz.org >> > > > > https://lists.openvz.org/mailman/listinfo/users >> > > > >> > > > >> > > > >> > > >> > > >> > >> > >> >> >> _______________________________________________ >> Users mailing list >> Users@openvz.org >> https://lists.openvz.org/mailman/listinfo/users > > > > -- > Sincerely yours, Pavel Odintsov -- Sincerely yours, Pavel Odintsov _______________________________________________ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users