FWIW, I first tried using the physical interface instead of the bridge, which also fails:
[root@katyusha ~]# prlsrvctl net set firewalla -t bridged --ifname enp5s0 -d "firewalla bridge" WARNING: You are using a deprecated CLI component that will be dropped in the next major release. Please use virsh instead Failed to update Virtual Network firewalla: Could not find a bridge for network adapter "firewalla". Please make sure the bridge is created. Jake On Sat, Apr 15, 2023 at 8:56 PM jjs - mainphrame <j...@mainphrame.com> wrote: > Hello all, > > After testing ovz-9 alpha releases for some weeks using VMs, I have OVZ9 > installed on a physical machine to do some further testing. Containers with > host routed connections are working fine, and can migrate to and from OVZ-7 > machines. > > So I wanted to go to the next level, create lan and wan bridges for > bridged networks, but it seems the prlsrvctl syntax has changed, and the > commands no longer work as they did on OVZ-7. > > A bridge br0 was created by the installer on the internal lan, and I added > a bridge br1 which connects to the default gateway device, but trying to > associate a bridge with a network fails with an error. > > I created the network "Bridged" (which used to be automatically created on > OVZ-7 install) and it defaulted to type host-only. Then I added the network > "firewalla" as I have done on the OVZ-7 machine, and it also defaulted to > host-only" > > root@katyusha ~]# prlsrvctl net list > WARNING: You are using a deprecated CLI component that will be dropped in > the next major release. Please use virsh instead > Network ID Type Bound To Bridge Slave interfaces > Bridged host-only virbr3 > Host-Only host-only virbr1 > firewalla host-only virbr4 > > My next step was to change the type from "host-only" to "bridged", and > that's where things went south: > > [root@katyusha ~]# prlsrvctl net set Bridged -t bridged --ifname br0 -d > "internal bridge" > WARNING: You are using a deprecated CLI component that will be dropped in > the next major release. Please use virsh instead > Failed to find network adapter br0 on the server. > > [root@katyusha ~]# prlsrvctl net set firewalla -t bridged --ifname br1 -d > "firewalla bridge" > WARNING: You are using a deprecated CLI component that will be dropped in > the next major release. Please use virsh instead > Failed to find network adapter br1 on the server. > > Is there some documentation on the updated syntax? > > Jake > >
_______________________________________________ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users
