What you seem to be getting at is a feature like VMware, VirtualBox, or the libvirt default constructed virbr0 interface to provide NAT to your guests. At the moment RHEV/oVirt only supports bridged networking with the ability to vlan if you so wish. In essence all the typical functionality of the linux bridgeutils and bonding driver. The restriction at the moment is that RHEV/oVirt only allows creating a valid network from a bridge which is attached to physical NIC. I have the usual suspect tricks by creating virtual NICs, using openvswitch, or VDE, etc in an attempt to achive both the notion of a private internal network between guests or a NAT networking for the guests. Thus this limits the ways you could achive NAT or internal networking for your guests. - Bridge to a physical NIC(s) which are attached to a network which already NAT'd. - Bridge to physical NIC on a private switch and create mutiple vlan's on top of that - Via the vlans you can in essence create multiple networks for your guests - Via the vlans you can either NAT to multiple networks or create private internal networks for your guests --> attach a VM or linux box with one nic attached to the private switch vlan this NIC appropriately and go to town with NAT attached to an external network on the other NIC - Hand configure macvtap (VEPA) or create vdsm hook for it and bridge to a private switch which supports hair-pinning (guest to guest communication) Suffice to say this is definately an area that both RHEV/oVirt could improve. - Chris
________________________________ From: [email protected] on behalf of Adam vonNieda Sent: Wed 3/28/2012 7:38 PM To: [email protected] Subject: Re: [Users] New to oVirt, I've got a couple of questions. Thanks for the Reply, Andrew. OK, so local storage obviously isn't the best architecture, but that's what I've got, so I'll figure something out. How about the networking question? How are people getting to their VM's from the physical network? Here's the original question.. Networking: When I set up a logical network, how is that accessed from the physical network? For example, if my physical network is 192.168.1.0, and my logical network is 155.223.44.0, how will I connect to port 80 on a virtual machine with the IP 155.223.44.5 from IP 192.168.1.10. Is there port forwarding? I didn't see mention of it in the guide. Thanks folks, -Adam On 3/28/12 6:41 PM, "Andrew Cathrow" <[email protected]> wrote: > > >----- Original Message ----- >> From: "Adam vonNieda" <[email protected]> >> To: [email protected] >> Sent: Wednesday, March 28, 2012 5:29:01 PM >> Subject: [Users] New to oVirt, I've got a couple of questions. >> >> >> >> >> Hi Folks, >> >> >> I've got oVirt 3.0 installed on a Fedora 16 machine, and I'm planning >> my data center. Great process, by the way, very straight forward. >> I'll have two host machines (on order) which I'll likely load with >> the oVirt image. These two hosts each will have a large amount of >> RAID 5 local storage. Here's my questions.. >> >> >> Storage: If I'm using this local storage on each host, will I be able >> to migrate VM's from host A to host B if needed, or does storage >> need to be shared. I guess another way of asking the question is, >> what's the best way for me to set this up? :) > >You'll need shared storage - NFS, iSCSI or Fiber channel. In the future >they'll be other options such as native Gluster, but for now you'll need >something like NFS. >> >> >> Networking: When I set up a logical network, how is that accessed >> from the physical network? For example, if my physical network is >> 192.168.1.0, and my logical network is 155.223.44.0, how will I >> connect to port 80 on a virtual machine with the IP 155.223.44.5 >> from IP 192.168.1.10. Is there port forwarding? I didn't see mention >> of it in the guide. >> >> >> Thanks very much! >> >> >> -Adam vonNieda >> _______________________________________________ >> Users mailing list >> [email protected] >> http://lists.ovirt.org/mailman/listinfo/users >> _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
