Hello, Thanks for the update mates.
Silly me! I loaded wrong ISO apparently. I shall update once am through the next installation. Thanks again! Regards, Keyur On Fri, Nov 9, 2012 at 8:49 PM, Itamar Heim <[email protected]> wrote: > On 11/09/2012 03:33 PM, Keyur Makwana wrote: > >> Hello, >> >> Thanks for having a look at this issue. >> > > the cluster level supported by this node is 3.0. > you should change your cluster level to 3.0 to use it (your DC should also > be 3.0. you may need to create a new DC, since you can't lower a DC level > if it has clusters in it iirc). > > but you are using in incompatible engine (ovirt) and node (rhev). > they have different compatibility levels even if the numbers are the same. > > > >> On ovirt-engine - either of the command did not work. >> >> Here is the output from the hypervisor. >> >> [root@h1 ~]# vdsClient -s 0 getVdsCaps >> HBAInventory = {'iSCSI': [{'InitiatorName': >> 'iqn.1994-05.com.redhat:**5e25411e9039'}], 'FC': [{'wwpn': >> '10000000c9cb2826', 'wwnn': '20000000c9cb2826', 'model': 'LPe1205-CIOv - >> Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}, {'wwpn': >> '10000000c9cb2827', 'wwnn': '20000000c9cb2827', 'model': 'LPe1205-CIOv - >> Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}]} >> ISCSIInitiatorName = iqn.1994-05.com.redhat:**5e25411e9039 >> bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, >> 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': >> '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': >> []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', >> 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', >> 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': >> '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} >> clusterLevels = ['3.0'] >> cpuCores = 12 >> cpuFlags = >> fpu,vme,de,pse,tsc,msr,pae,**mce,cx8,apic,mtrr,pge,mca,** >> cmov,pat,pse36,clflush,dts,**acpi,mmx,fxsr,sse,sse2,ss,ht,** >> tm,pbe,syscall,nx,pdpe1gb,**rdtscp,lm,constant_tsc,arch_** >> perfmon,pebs,bts,rep_good,**xtopology,nonstop_tsc,** >> aperfmperf,pni,pclmulqdq,**dtes64,monitor,ds_cpl,vmx,smx,** >> est,tm2,ssse3,cx16,xtpr,pdcm,**dca,sse4_1,sse4_2,popcnt,aes,** >> lahf_lm,arat,epb,dts,tpr_**shadow,vnmi,flexpriority,ept,** >> vpid,model_486,model_pentium,**model_pentium2,model_pentium3,** >> model_pentiumpro,model_qemu32,**model_coreduo,model_core2duo,** >> model_n270,model_Conroe,model_**Penryn,model_Nehalem,model_** >> Westmere,model_Opteron_G1 >> cpuModel = Intel(R) Xeon(R) CPU E5645 @ 2.40GHz >> cpuSockets = 2 >> cpuSpeed = 2400.276 >> emulatedMachines = ['rhel6.2.0', 'pc', 'rhel6.1.0', 'rhel6.0.0', >> 'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0'] >> guestOverhead = 65 >> hooks = {'before_vm_start': {'50_vhostmd': {'md5': >> '**1635e45584995d9ad2629939cb0bcd**bf'}}, 'after_vm_destroy': >> {'50_vhostmd': >> {'md5': '**7e7509430304099f38e4a9de966af0**90'}}, >> 'before_vm_dehibernate': >> {'50_vhostmd': {'md5': '**1635e45584995d9ad2629939cb0bcd**bf'}}, >> 'before_vm_migrate_**destination': {'50_vhostmd': {'md5': >> '**1635e45584995d9ad2629939cb0bcd**bf'}}} >> kvmEnabled = true >> lastClient = 172.29.5.200 >> lastClientIface = rhevm >> management_ip = 172.29.81.141 >> memSize = 64420 >> networks = {'rhevm': {'addr': '172.29.81.141', 'cfg': {'IPV6FORWARDING': >> 'no', 'IPV6INIT': 'no', 'SKIPLIBVIRT': 'True', 'IPADDR': >> '172.29.81.141', 'ONBOOT': 'yes', 'DELAY': '0', 'DEVICE': 'rhevm', >> 'NETMASK': '255.255.255.0', 'BOOTPROTO': 'static', 'IPV6_AUTOCONF': >> 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'GATEWAY': '172.29.81.1'}, >> 'ports': ['eth8'], 'netmask': '255.255.255.0', 'stp': 'off', 'gateway': >> '172.29.81.1'}} >> nics = {'eth9': {'hwaddr': '5C:F3:FC:98:19:82', 'netmask': '', 'speed': >> 0, 'addr': ''}, 'eth8': {'hwaddr': '5C:F3:FC:98:19:80', 'netmask': '', >> 'speed': 1000, 'addr': ''}, 'eth7': {'hwaddr': '00:00:C9:D2:16:73', >> 'netmask': '', 'speed': 0, 'addr': ''}, 'eth6': {'hwaddr': >> '00:00:C9:D2:16:6F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth5': >> {'hwaddr': '00:00:C9:D2:16:72', 'netmask': '', 'speed': 0, 'addr': ''}, >> 'eth4': {'hwaddr': '00:00:C9:D2:16:6E', 'netmask': '', 'speed': 0, >> 'addr': ''}, 'eth3': {'hwaddr': '00:00:C9:D2:16:71', 'netmask': '', >> 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:00:C9:D2:16:6D', >> 'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr': >> '00:00:C9:D2:16:70', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth0': >> {'hwaddr': '00:00:C9:D2:16:6C', 'netmask': '', 'speed': 0, 'addr': ''}} >> operatingSystem = {'release': '20120510.0.el6_2', 'version': '6.2', >> 'name': 'RHEV Hypervisor'} >> packages2 = {'kernel': {'release': '220.17.1.el6.x86_64', 'buildtime': >> 1335447433.0, 'version': '2.6.32'}, 'spice-server': {'release': '5.el6', >> 'buildtime': '1319663438', 'version': '0.8.2'}, 'vdsm': {'release': >> '112.12.el6_2', 'buildtime': '1334495504', 'version': '4.9'}, >> 'qemu-kvm': {'release': '2.209.el6_2.5', 'buildtime': '1334776518', >> 'version': '0.12.1.2'}, 'libvirt': {'release': '23.el6_2.8', >> 'buildtime': '1333958926', 'version': '0.9.4'}, 'qemu-img': {'release': >> '2.209.el6_2.5', 'buildtime': '1334776518', 'version': '0.12.1.2'}} >> reservedMem = 256 >> software_revision = 112.12 >> software_version = 4.9 >> supportedProtocols = ['2.2', '2.3'] >> supportedRHEVMs = ['3.0'] >> uuid = C12E325E-3D69-11E1-91C1-**5CF3FC981980_00:00:C9:D2:16:6C >> version_name = Snow Man >> vlans = {} >> vmTypes = ['kvm'] >> [root@h1 ~]# >> >> Regards, >> Keyur >> >> >> >> On Fri, Nov 9, 2012 at 7:36 PM, Yair Zaslavsky <[email protected] >> <mailto:[email protected]>> wrote: >> >> For troubleshooting - >> Can you run on your host machine >> >> vdsClient 0 getVdsCaps (might be vdsClient -s 0 getVdsCaps) >> >> and send us the results? >> >> >> ------------------------------**------------------------------** >> ------------ >> >> *From: *"Keyur Makwana" <[email protected] >> <mailto:[email protected]>> >> *To: *[email protected] <mailto:[email protected]> >> *Sent: *Friday, November 9, 2012 12:50:22 PM >> *Subject: *[Users] Ovirt Host (3.0) compatability issue with >> >> Cluster (3.1) >> >> >> Hello All, >> >> I am new to Ovirt and trying to Implement Ovirt in my >> organisation with an view to implement complete open source >> virtualization solution instead of using VMware or other Paid >> once. >> >> I have installed ovirt-engine on Fedora 17 and have installed >> Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization >> Hypervisor release 6.2 (20120510.0.el6_2) >> >> >> Post installation engine started fine but while trying to add >> host its giving me error as below. >> >> Host host1 is compatible with versions (3.0) and cannot join >> Cluster Default which is set to version 3.1. >> >> I don't know what exact details I would need to share for >> troubleshooting. Hence I have attached a file with details of >> rpms installed on ovirt-engine and node. ( One may not like to >> scroll the entire file) >> >> I might be missing something very silly or I may sound too stupid. >> >> Ovirt masters : Please guide. >> >> Thanks in advance, >> Keyur >> >> >> ______________________________**_________________ >> Users mailing list >> [email protected] <mailto:[email protected]> >> >> http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users> >> >> >> >> >> >> >> ______________________________**_________________ >> Users mailing list >> [email protected] >> http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users> >> >> > >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
