2012/11/9 Sven Knohsalla <s.knohsa...@netbiscuits.com> > Totally forgot the main problem:**** > > ** ** > > This config won’t survive a reboot, so where can I push the button > therefore J**** > > ** ** > > Best,**** > > Sven.**** > > ** ** > > *Von:* Sven Knohsalla > *Gesendet:* Freitag, 9. November 2012 17:35 > *An:* users@ovirt.org > *Betreff:* AW: NFS issue using ovirt-node-iso-2.5.5-0.1.fc17**** > > ** ** > > Hi,**** > > ** ** > > I just wanted to update that NFS is working now with > ovirt-node-iso-2.5.5-0.1.fc17, > but I had to change /etc/nfsmount.conf in the following line:**** > > ** ** > > 89 # Enable File Locking**** > > 90 # Lock=True (seems to be true per default, although commented out)**** > > > to:**** > > ** ** > > # Enable File Locking**** > > Lock=False**** > > ** ** > > Is there anybody else, who is running in the same problem?**** > > ** ** > > Thanks in advance!**** > > ** ** > > Kind regards, Sven.**** > > ** ** > > ** ** > > ** ** > > *Von:* Sven Knohsalla > *Gesendet:* Donnerstag, 8. November 2012 15:55 > *An:* users@ovirt.org > *Betreff:* NFS issue using ovirt-node-iso-2.5.5-0.1.fc17**** > > ** ** > > Hi,**** > > ** ** > > just created a test environment, including ovirt-engine 3.1 + > ovirt-node-iso-2.5.5-0.1.fc17 + qnap iscsi + qnap nas (NFSv3).**** > > iSCSI connection is working fine. > When connecting to Export/ISO Domain via webgui the progress is taking > forever (waited ~ 10 mins)**** > > ** ** > > Back to console I first tried to connect from ovirt-engine to nfs storage > of our NAS:**** > > > showmount -e 172.16.101.95 -> > Export list for 172.16.101.95:**** > > /NFS-ISO01**** > > /Export-NFS01**** > > /…**** > > mount -t nfs 172.16.101.95:/Export-NFS01 /mnt/nastest/**** > > mount ->**** > > 172.16.101.95:/Export-NFS01/ on /mnt/nastest type nfs > (rw,relatime,vers=3,rsize=32768,wsize=32768,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys, > > mountaddr=172.16.101.95,mountvers=3,mountport=56272,mountproto=udp,local_lock=none,addr=172.16.101.95) > **** > > > Touching a file on mountpoint is working,too.**** > > ** ** > > On ovirt-node:**** > > > showmount -e 172.16.101.95-> > Export list for 172.16.101.95:**** > > /NFS-ISO01**** > > /Export-NFS01**** > > /… > > mount -t nfs 172.16.101.95:/Export-NFS01 /mnt/nastest/ -> > mount.nfs: rpc.statd is not running but is required for remote locking.*** > * > > mount.nfs: Either use '-o nolock' to keep locks local, or start statd.**** > > mount.nfs: an incorrect mount option was specified > > mount -t nfs 172.16.101.95:/Export-NFS01 /mnt/nastest/ -o nolock -> > working (also for vdsm)! > > There’s no firewall between NAS and node (except node fw)**** > > > rpcbind isn’t installed on node: > http://gerrit.ovirt.org/#/c/4720/**** > > > It seems the package isn’t needed anymore by this post in gerrit?**** > > ** ** > > Well, how to proceed here? > Am I getting my wires crossed here or just missed a configuration?**** > > ** ** > > Thx in advance!**** > > ** ** > > Best,**** > > Sven.**** > > ** ** > > Sven Knohsalla | System Administration**** > > ** ** > > Office +49 631 68036 433 | Fax +49 631 68036 111 |E-Mail > s.knohsa...@netbiscuits.com | Skype: netbiscuits.admin **** > > Netbiscuits GmbH | Europaallee 10 | 67657 | GERMANY**** > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > Hi, Is statd running on your QNAP NAS?
Alex
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users