Le 14/01/2013 22:24, Jeff Bailey a écrit :
On 1/14/2013 9:08 AM, Nicolas Ecarnot wrote:
Hi,
I'm trying to install oVirt node 2.5.5-0.1.fc17 and it is node going
well. I'm trying to install it on a Dell blade M610 via a iDrac, and
I'm quit accustomed to this kind of thing.
- As I already had the issue of the label on the grub boot line, I
knew how to specify /dev/sr0 or sr1 on the linux line. Well.
- The install is ok with discovering my hard drive, and the
installation seems to be fine. After rebooting, the bott process is
leading me to the login prompt where the documentation tells me to log
as 'admin' with the correct password :
The keyboard is not responding, I can not even type the user name.
Try adding usbcore.autosuspend=-1 to the kernel command line. I've had
problems with iDRAC 7 virtual consoles with both Fedora 17 and 18 and
this fixes it. I don't know about iDRAC 6 but trying it couldn't hurt
:) Getting the machine to always boot with that option could be a bit
tricky with Node. I'm not sure if you'll just be able to edit the
grub.conf and persist it or not.
Thank you very much, Jeff, this did the trick !
And better than that : adding it on the first use in the kernel line
leads it to be permanently added in the grub conf even after a reboot.
Nice !
--
Nicolas Ecarnot
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
