Hi Jithin, By looking at the logs, looks like you already had a volume named 'vol1' in the gluster and you have tried to create another volume with the same name from the UI. Thats why you were able to see the volume 'vol1' even after the creation was failed.
I am not sure which version of ovirt-engine you are using. The recent releases(3.2) and the upstream code currently have the support for reflecting the old volumes in the UI even though there were created via UI or directly from CLI. With this change vol1 should have appeared in the UI even before the creation. So it looks like there are no issues with the creation of volume. I am not familiar with the mount issues, some one else will help you out. Thanks, Kanagaraj ----- Original Message ----- > From: "Jithin Raju" <[email protected]> > To: "Kanagaraj Mayilsamy" <[email protected]>, [email protected] > Sent: Monday, January 21, 2013 1:33:56 PM > Subject: Re: [Users] gluster volume creation error > > > Hi Kanagaraj, > > > PFA, > > > gluster version info: > glusterfs-geo-replication-3.2.7-2.fc17.x86_64 > glusterfs-3.2.7-2.fc17.x86_64 > glusterfs-fuse-3.2.7-2.fc17.x86_64 > glusterfs-rdma-3.2.7-2.fc17.x86_64 > vdsm-gluster-4.10.0-10.fc17.noarch > glusterfs-server-3.2.7-2.fc17.x86_64 > > > Thanks, > Jithin > > > > On Mon, Jan 21, 2013 at 1:15 PM, Kanagaraj Mayilsamy < > [email protected] > wrote: > > > > > > ----- Original Message ----- > > From: "Jithin Raju" < [email protected] > > > To: [email protected] > > Sent: Monday, January 21, 2013 1:10:15 PM > > Subject: [Users] gluster volume creation error > > > > > > > > Hi , > > > > > > Volume creation is failing in posixfs data center. > > > > > > While trying to create a distribute volume web UI exits with error: > > > > > > "creation of volume failed" and volume is not listed in web UI. > > > Can you please provide the engine.log and vdsm.log(from all the hosts > in the cluster ). > > > > > > From the backend I can see volume got created. > > > > > > gluster volume info > > > > > > > > Volume Name: vol1 > > Type: Distribute > > Status: Created > > Number of Bricks: 2 > > Transport-type: tcp > > Bricks: > > Brick1: x.250.76.71:/data > > Brick2: x.250.76.70:/data > > > > > > When I try to mount the volume manually to /mnt > > its not giving any message > > > > > > exit status is zero. > > > > > > mount command listed as below: > > > > > > fig:/vol1 on /mnt type fuse.glusterfs > > (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) > > > > > > > > when I run a df it gives me like below: > > "df: `/mnt': Transport endpoint is not connected" > > > > > > > > So i just tail'ed > > "/var/log/glusterfs/etc-glusterfs-glusterd.vol.log" > > > > > > > > [2013-01-21 11:30:07.828518] W > > [socket.c:1494:__socket_proto_state_machine] 0-socket.management: > > reading from socket failed. Error (Transport endpoint is not > > connected), peer ( 135.250.76.70:1009 ) > > [2013-01-21 11:30:10.839882] W > > [socket.c:1494:__socket_proto_state_machine] 0-socket.management: > > reading from socket failed. Error (Transport endpoint is not > > connected), peer ( 135.250.76.70:1007 ) > > [2013-01-21 11:30:13.852374] W > > [socket.c:1494:__socket_proto_state_machine] 0-socket.management: > > reading from socket failed. Error (Transport endpoint is not > > connected), peer ( 135.250.76.70:1005 ) > > [2013-01-21 11:30:16.864634] W > > [socket.c:1494:__socket_proto_state_machine] 0-socket.management: > > reading from socket failed. Error (Transport endpoint is not > > connected), peer ( 135.250.76.70:1003 ) > > [2013-01-21 11:30:19.875986] W > > [socket.c:1494:__socket_proto_state_machine] 0-socket.management: > > reading from socket failed. Error (Transport endpoint is not > > connected), peer ( 135.250.76.70:1001 ) > > [2013-01-21 11:30:22.886854] W > > [socket.c:1494:__socket_proto_state_machine] 0-socket.management: > > reading from socket failed. Error (Transport endpoint is not > > connected), peer ( 135.250.76.70:999 ) > > [2013-01-21 11:30:25.898840] W > > [socket.c:1494:__socket_proto_state_machine] 0-socket.management: > > reading from socket failed. Error (Transport endpoint is not > > connected), peer ( 135.250.76.70:997 ) > > [2013-01-21 11:30:28.910000] W > > [socket.c:1494:__socket_proto_state_machine] 0-socket.management: > > reading from socket failed. Error (Transport endpoint is not > > connected), peer ( 135.250.76.70:995 ) > > [2013-01-21 11:30:31.922336] W > > [socket.c:1494:__socket_proto_state_machine] 0-socket.management: > > reading from socket failed. Error (Transport endpoint is not > > connected), peer ( 135.250.76.70:993 ) > > [2013-01-21 11:30:34.934772] W > > [socket.c:1494:__socket_proto_state_machine] 0-socket.management: > > reading from socket failed. Error (Transport endpoint is not > > connected), peer ( 135.250.76.70:991 ) > > [2013-01-21 11:30:37.946215] W > > [socket.c:1494:__socket_proto_state_machine] 0-socket.management: > > reading from socket failed. Error (Transport endpoint is not > > connected), peer ( 135.250.76.70:989 ) > > > > > > > > > > Just wanted to know what am I doing wrong here? > > > > > > package details: > > > > > > > > vdsm-python-4.10.0-10.fc17.x86_64 > > vdsm-cli-4.10.0-10.fc17.noarch > > vdsm-xmlrpc-4.10.0-10.fc17.noarch > > vdsm-4.10.0-10.fc17.x86_64 > > vdsm-gluster-4.10.0-10.fc17.noarch > > > > > > selinux is permissive,iptables i have flushed. > > > > > > Thanks, > > Jithin > > _______________________________________________ > > Users mailing list > > [email protected] > > http://lists.ovirt.org/mailman/listinfo/users > > > > _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
