Am Dienstag, den 05.02.2013, 16:02 -0800 schrieb No Reply: > No comments? J This has to be an important feature of oVirt no?
Hey, does it basically work - e.g. when booting from USB - when you add the BOOTIF=eth0 storage_init parameters? So using a device name instead of a mac address? Greetings fabian > From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On > Behalf Of No Reply > Sent: Saturday, February 02, 2013 20:30 > To: users@ovirt.org > Subject: Re: [Users] Ovirt Node Automated Installation... full > unattended installation? > > > > > The plot thickens… I removed BOOTIF and used IPAPPEND 2 directive > which per the documentation does automatic append of BOOTIF parameter > using the MAC of the adapter that PXE used, and received the > DHCPOFFER… then the automated installation worked as the documentation > suggests. Does this make sense, or is this some type of odd quirk or > bug? > > > > Does not work… (FF:FF:FF:FF:FF:FF is not the real MAC used, just > redacted the real MAC)… > > > > KERNEL images/oVirt/2.5.5-0.1/vmlinuz0 > > APPEND rootflags=loop initrd=images/oVirt/2.5.5-0.1/initrd0.img > root=live:/ovirt-node-iso-2.5.5-0.1.fc17.iso rootfstype=auto ro > liveimg check rootflags=ro crashkernel=512M-2G:64M,2G-:128M > elevator=deadline rd_NO_LVM rd.luks=0 rd.md=0 rd.dm=0 > storage_init=/dev/sda BOOTIF=<FF:FF:FF:FF:FF:FF> > > > > Works… > > > > KERNEL images/oVirt/2.5.5-0.1/vmlinuz0 > > IPAPPEND 2 > > APPEND rootflags=loop initrd=images/oVirt/2.5.5-0.1/initrd0.img > root=live:/ovirt-node-iso-2.5.5-0.1.fc17.iso rootfstype=auto ro > liveimg check rootflags=ro crashkernel=512M-2G:64M,2G-:128M > elevator=deadline rd_NO_LVM rd.luks=0 rd.md=0 rd.dm=0 > storage_init=/dev/sda > > > > > > > > From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On > Behalf Of Schorschi > Sent: Saturday, February 02, 2013 20:07 > To: users@ovirt.org > Subject: [Users] Ovirt Node Automated Installation... full unattended > installation? > > > > > Ok, reading the RHEV-H node automated installation, given the oVirt > documentation states the same automated installation parameters are > supported, I can’t see to resolve one key issue… > > > > First boot of PXE configuration does an ‘uninstall’ to ensure no past > installation of oVirt node exists… this works 100% unattended. > However using install or reinstall or local_boot (a.k.a. upgrade) or > even firstboot option, and even no option, on the APPEND command line > via PXE, the automated installation stops. Waiting for interactive > response? Is this the expected behavior? Even just using > init_storage and BOOTIF, the only two required parameters, the > automated process stops for interactive input? So how do you do a > completely automated installation with zero human interactive action > required? > > > > Uninstall… This works as expected… > > > > KERNEL images/oVirt/2.5.5-0.1/vmlinuz0 > > APPEND rootflags=loop initrd=images/oVirt/2.5.5-0.1/initrd0.img > root=live:/ovirt-node-iso-2.5.5-0.1.fc17.iso rootfstype=auto ro > liveimg check rootflags=ro crashkernel=512M-2G:64M,2G-:128M > elevator=deadline uninstall > > > > Install… This does not work as expected, per how the documentation > implies it should? > > > > KERNEL images/oVirt/2.5.5-0.1/vmlinuz0 > > APPEND rootflags=loop initrd=images/oVirt/2.5.5-0.1/initrd0.img > root=live:/ovirt-node-iso-2.5.5-0.1.fc17.iso rootfstype=auto ro > liveimg check rootflags=ro crashkernel=512M-2G:64M,2G-:128M > elevator=deadline rd_NO_LVM rd.luks=0 rd.md=0 rd.dm=0 > storage_init=/dev/sda BOOTIF=<FF:FF:FF:FF:FF:FF> > > > > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users