Hi, can you please tell me what's the DC version? can you also please run the following query and reply with the results?
select * from vdc_options where option_name like '%SupportForceCreateVG%'; ----- Original Message ----- > From: "xianghuadu" <[email protected]> > To: "Liron Aravot" <[email protected]> > Cc: "users" <[email protected]> > Sent: Wednesday, February 27, 2013 10:30:09 AM > Subject: Re: Re: [Users] ovirt Connection Storage error > > > hi liron aravot > Thank you for your help > > > > [root@kvm1 libvirt]# cat libvirtd.conf > # Master libvirt daemon configuration file > # > # For further information consult http://libvirt.org/format.html > # > # NOTE: the tests/daemon-conf regression test script requires > # that each "PARAMETER = VALUE" line in this file have the parameter > # name just after a leading "#". > > ################################################################# > # > # Network connectivity controls > # > > # Flag listening for secure TLS connections on the public TCP/IP > port. > # NB, must pass the --listen flag to the libvirtd process for this to > # have any effect. > # > # It is necessary to setup a CA and issue server certificates before > # using this capability. > # > # This is enabled by default, uncomment this to disable it > #listen_tls = 0 > > # Listen for unencrypted TCP connections on the public TCP/IP port. > # NB, must pass the --listen flag to the libvirtd process for this to > # have any effect. > # > # Using the TCP socket requires SASL authentication by default. Only > # SASL mechanisms which support data encryption are allowed. This is > # DIGEST_MD5 and GSSAPI (Kerberos5) > # > # This is disabled by default, uncomment this to enable it. > #listen_tcp = 1 > > > > # Override the port for accepting secure TLS connections > # This can be a port number, or service name > # > #tls_port = "16514" > > # Override the port for accepting insecure TCP connections > # This can be a port number, or service name > # > #tcp_port = "16509" > > > # Override the default configuration which binds to all network > # interfaces. This can be a numeric IPv4/6 address, or hostname > # > #listen_addr = "192.168.0.1" > > > # Flag toggling mDNS advertizement of the libvirt service. > # > # Alternatively can disable for all services on a host by > # stopping the Avahi daemon > # > # This is enabled by default, uncomment this to disable it > #mdns_adv = 0 > > # Override the default mDNS advertizement name. This must be > # unique on the immediate broadcast network. > # > # The default is "Virtualization Host HOSTNAME", where HOSTNAME > # is subsituted for the short hostname of the machine (without > domain) > # > #mdns_name = "Virtualization Host Joe Demo" > > > ################################################################# > # > # UNIX socket access controls > # > > # Set the UNIX domain socket group ownership. This can be used to > # allow a 'trusted' set of users access to management capabilities > # without becoming root. > # > # This is restricted to 'root' by default. > #unix_sock_group = "libvirt" > > # Set the UNIX socket permissions for the R/O socket. This is used > # for monitoring VM status only > # > # Default allows any user. If setting group ownership may want to > # restrict this to: > #unix_sock_ro_perms = "0777" > > # Set the UNIX socket permissions for the R/W socket. This is used > # for full management of VMs > # > # Default allows only root. If PolicyKit is enabled on the socket, > # the default will change to allow everyone (eg, 0777) > # > # If not using PolicyKit and setting group ownership for access > # control then you may want to relax this to: > #unix_sock_rw_perms = "0770" > > # Set the name of the directory in which sockets will be > found/created. > #unix_sock_dir = "/var/run/libvirt" > > ################################################################# > # > # Authentication. > # > # - none: do not perform auth checks. If you can connect to the > # socket you are allowed. This is suitable if there are > # restrictions on connecting to the socket (eg, UNIX > # socket permissions), or if there is a lower layer in > # the network providing auth (eg, TLS/x509 certificates) > # > # - sasl: use SASL infrastructure. The actual auth scheme is then > # controlled from /etc/sasl2/libvirt.conf. For the TCP > # socket only GSSAPI & DIGEST-MD5 mechanisms will be used. > # For non-TCP or TLS sockets, any scheme is allowed. > # > # - polkit: use PolicyKit to authenticate. This is only suitable > # for use on the UNIX sockets. The default policy will > # require a user to supply their own password to gain > # full read/write access (aka sudo like), while anyone > # is allowed read/only access. > # > # Set an authentication scheme for UNIX read-only sockets > # By default socket permissions allow anyone to connect > # > # To restrict monitoring of domains you may wish to enable > # an authentication mechanism here > #auth_unix_ro = "none" > > # Set an authentication scheme for UNIX read-write sockets > # By default socket permissions only allow root. If PolicyKit > # support was compiled into libvirt, the default will be to > # use 'polkit' auth. > # > # If the unix_sock_rw_perms are changed you may wish to enable > # an authentication mechanism here > #auth_unix_rw = "none" > > # Change the authentication scheme for TCP sockets. > # > # If you don't enable SASL, then all TCP traffic is cleartext. > # Don't do this outside of a dev/test scenario. For real world > # use, always enable SASL and use the GSSAPI or DIGEST-MD5 > # mechanism in /etc/sasl2/libvirt.conf > #auth_tcp = "sasl" > > # Change the authentication scheme for TLS sockets. > # > # TLS sockets already have encryption provided by the TLS > # layer, and limited authentication is done by certificates > # > # It is possible to make use of any SASL authentication > # mechanism as well, by using 'sasl' for this option > #auth_tls = "none" > > > > ################################################################# > # > # TLS x509 certificate configuration > # > > > # Override the default server key file path > # > #key_file = "/etc/pki/libvirt/private/serverkey.pem" > > # Override the default server certificate file path > # > #cert_file = "/etc/pki/libvirt/servercert.pem" > > # Override the default CA certificate path > # > #ca_file = "/etc/pki/CA/cacert.pem" > > # Specify a certificate revocation list. > # > # Defaults to not using a CRL, uncomment to enable it > #crl_file = "/etc/pki/CA/crl.pem" > > > > ################################################################# > # > # Authorization controls > # > > > # Flag to disable verification of our own server certificates > # > # When libvirtd starts it performs some sanity checks against > # its own certificates. > # > # Default is to always run sanity checks. Uncommenting this > # will disable sanity checks which is not a good idea > #tls_no_sanity_certificate = 1 > > # Flag to disable verification of client certificates > # > # Client certificate verification is the primary authentication > mechanism. > # Any client which does not present a certificate signed by the CA > # will be rejected. > # > # Default is to always verify. Uncommenting this will disable > # verification - make sure an IP whitelist is set > #tls_no_verify_certificate = 1 > > > # A whitelist of allowed x509 Distinguished Names > # This list may contain wildcards such as > # > # "C=GB,ST=London,L=London,O=Red Hat,CN=*" > # > # See the POSIX fnmatch function for the format of the wildcards. > # > # NB If this is an empty list, no client can connect, so comment out > # entirely rather than using empty list to disable these checks > # > # By default, no DN's are checked > #tls_allowed_dn_list = ["DN1", "DN2"] > > > # A whitelist of allowed SASL usernames. The format for usernames > # depends on the SASL authentication mechanism. Kerberos usernames > # look like username@REALM > # > # This list may contain wildcards such as > # > # "*@EXAMPLE.COM" > # > # See the POSIX fnmatch function for the format of the wildcards. > # > # NB If this is an empty list, no client can connect, so comment out > # entirely rather than using empty list to disable these checks > # > # By default, no Username's are checked > #sasl_allowed_username_list = ["[email protected]", "[email protected]" > ] > > > > ################################################################# > # > # Processing controls > # > > # The maximum number of concurrent client connections to allow > # over all sockets combined. > #max_clients = 20 > > > # The minimum limit sets the number of workers to start up > # initially. If the number of active clients exceeds this, > # then more threads are spawned, upto max_workers limit. > # Typically you'd want max_workers to equal maximum number > # of clients allowed > #min_workers = 5 > #max_workers = 20 > > > # The number of priority workers. If all workers from above > # pool will stuck, some calls marked as high priority > # (notably domainDestroy) can be executed in this pool. > #prio_workers = 5 > > # Total global limit on concurrent RPC calls. Should be > # at least as large as max_workers. Beyond this, RPC requests > # will be read into memory and queued. This directly impact > # memory usage, currently each request requires 256 KB of > # memory. So by default upto 5 MB of memory is used > # > # XXX this isn't actually enforced yet, only the per-client > # limit is used so far > #max_requests = 20 > > # Limit on concurrent requests from a single client > # connection. To avoid one client monopolizing the server > # this should be a small fraction of the global max_requests > # and max_workers parameter > #max_client_requests = 5 > > ################################################################# > # > # Logging controls > # > > # Logging level: 4 errors, 3 warnings, 2 information, 1 debug > # basically 1 will log everything possible > #log_level = 3 > > # Logging filters: > # A filter allows to select a different logging level for a given > category > # of logs > # The format for a filter is: > # x:name > # where name is a match string e.g. remote or qemu > # the x prefix is the minimal level where matching messages should be > logged > # 1: DEBUG > # 2: INFO > # 3: WARNING > # 4: ERROR > # > # Multiple filter can be defined in a single @filters, they just need > to be > # separated by spaces. > # > # e.g: > # log_filters="3:remote 4:event" > # to only get warning or errors from the remote layer and only errors > from > # the event layer. > > # Logging outputs: > # An output is one of the places to save logging information > # The format for an output can be: > # x:stderr > # output goes to stderr > # x:syslog:name > # use syslog for the output and use the given name as the ident > # x:file:file_path > # output to a file, with the given filepath > # In all case the x prefix is the minimal level, acting as a filter > # 1: DEBUG > # 2: INFO > # 3: WARNING > # 4: ERROR > # > # Multiple output can be defined, they just need to be separated by > spaces. > # e.g.: > # log_outputs="3:syslog:libvirtd" > # to log all warnings and errors to syslog under the libvirtd ident > > # Log debug buffer size: default 64 > # The daemon keeps an internal debug log buffer which will be dumped > in case > # of crash or upon receiving a SIGUSR2 signal. This setting allows to > override > # the default buffer size in kilobytes. > # If value is 0 or less the debug log buffer is deactivated > #log_buffer_size = 64 > > > ################################################################## > # > # Auditing > # > # This setting allows usage of the auditing subsystem to be altered: > # > # audit_level == 0 -> disable all auditing > # audit_level == 1 -> enable auditing, only if enabled on host > (default) > # audit_level == 2 -> enable auditing, and exit if disabled on host > # > #audit_level = 2 > # > # If set to 1, then audit messages will also be sent > # via libvirt logging infrastructure. Defaults to 0 > # > #audit_logging = 1 > > ################################################################### > # UUID of the host: > # Provide the UUID of the host here in case the command > # 'dmidecode -s system-uuid' does not provide a valid uuid. In case > # 'dmidecode' does not provide a valid UUID and none is provided > here, a > # temporary UUID will be generated. > # Keep the format of the example UUID below. UUID must not have all > digits > # be the same. > > # NB This default all-zeros UUID will not work. Replace > # it with the output of the 'uuidgen' command and then > # uncomment this entry > #host_uuid = "00000000-0000-0000-0000-000000000000" > > ################################################################### > # Keepalive protocol: > # This allows libvirtd to detect broken client connections or even > # dead client. A keepalive message is sent to a client after > # keepalive_interval seconds of inactivity to check if the client is > # still responding; keepalive_count is a maximum number of keepalive > # messages that are allowed to be sent to the client without getting > # any response before the connection is considered broken. In other > # words, the connection is automatically closed approximately after > # keepalive_interval * (keepalive_count + 1) seconds since the last > # message received from the client. If keepalive_interval is set to > # -1, libvirtd will never send keepalive requests; however clients > # can still send them and the deamon will send responses. When > # keepalive_count is set to 0, connections will be automatically > # closed after keepalive_interval seconds of inactivity without > # sending any keepalive messages. Disabled by default. > # > #keepalive_interval = 5 > #keepalive_count = 5 > # > # If set to 1, libvirtd will refuse to talk to clients that do not > # support keepalive protocol. Defaults to 0. > # > #keepalive_required = 1 > ## beginning of configuration section by vdsm-4.9.6 > listen_addr="0.0.0.0" > unix_sock_group="kvm" > unix_sock_rw_perms="0770" > auth_unix_rw="sasl" > save_image_format="lzop" > log_outputs="1:file:/var/log/libvirtd.log" > log_filters="1:libvirt 3:event 3:json 1:util 1:qemu" > ca_file="/etc/pki/vdsm/certs/cacert.pem" > cert_file="/etc/pki/vdsm/certs/vdsmcert.pem" > key_file="/etc/pki/vdsm/keys/vdsmkey.pem" > ## end of configuration section by vdsm-4.9.6 > > > > [root@kvm1 libvirt]# tail /var/log/libvirt/libvirtd.log -n 20 > 2013-02-26 06:33:27.063+0000: 2128: error : > remoteDispatchAuthPolkit:2559 : Policy kit denied action > org.libvirt.unix.manage from pid 4031, uid 36: exit status 2 > 2013-02-26 06:33:27.063+0000: 2128: error : > remoteDispatchAuthPolkit:2588 : authentication failed: Authorization > requires authentication but no agent is available. > > 2013-02-26 06:33:27.098+0000: 2119: error : virNetSocketReadWire:999 > : End of file while reading data: Input/output error > 2013-02-26 06:33:27.333+0000: 2120: error : > remoteDispatchAuthPolkit:2559 : Policy kit denied action > org.libvirt.unix.manage from pid 4041, uid 36: exit status 2 > 2013-02-26 06:33:27.333+0000: 2120: error : > remoteDispatchAuthPolkit:2588 : authentication failed: Authorization > requires authentication but no agent is available. > > 2013-02-26 06:33:27.368+0000: 2119: error : virNetSocketReadWire:999 > : End of file while reading data: Input/output error > 2013-02-26 06:33:27.603+0000: 2122: error : > remoteDispatchAuthPolkit:2559 : Policy kit denied action > org.libvirt.unix.manage from pid 4051, uid 36: exit status 2 > 2013-02-26 06:33:27.603+0000: 2122: error : > remoteDispatchAuthPolkit:2588 : authentication failed: Authorization > requires authentication but no agent is available. > > 2013-02-26 06:33:27.636+0000: 2119: error : virNetSocketReadWire:999 > : End of file while reading data: Input/output error > 2013-02-26 06:33:27.871+0000: 2124: error : > remoteDispatchAuthPolkit:2559 : Policy kit denied action > org.libvirt.unix.manage from pid 4061, uid 36: exit status 2 > 2013-02-26 06:33:27.872+0000: 2124: error : > remoteDispatchAuthPolkit:2588 : authentication failed: Authorization > requires authentication but no agent is available. > > 2013-02-26 06:33:27.904+0000: 2119: error : virNetSocketReadWire:999 > : End of file while reading data: Input/output error > 2013-02-26 06:33:28.142+0000: 2126: error : > remoteDispatchAuthPolkit:2559 : Policy kit denied action > org.libvirt.unix.manage from pid 4071, uid 36: exit status 2 > 2013-02-26 06:33:28.142+0000: 2126: error : > remoteDispatchAuthPolkit:2588 : authentication failed: Authorization > requires authentication but no agent is available. > > 2013-02-26 06:33:28.176+0000: 2119: error : virNetSocketReadWire:999 > : End of file while reading data: Input/output error > > > xianghuadu > > > > From: Liron Aravot > Date: 2013-02-27 16:01 > To: xianghuadu > CC: users > Subject: Re: [Users] ovirt Connection Storage error > > Hi, looking in the vdsm logs i see > libvirtError: authentication failed: Authorization requires > authentication but no agent is available. > > can you please attach your libvirt configuration file and the libvirt > log perhaps? > > ----- Original Message ----- > > From: "xianghuadu" <[email protected]> > > To: "Liron Aravot" <[email protected]> > > Cc: "users" <[email protected]> > > Sent: Tuesday, February 26, 2013 10:21:57 AM > > Subject: Re: Re: [Users] ovirt Connection Storage error > > > > > > hi liron aravot > > attached is full vdsm log > > thx > > > > > > xianghuadu > > > > > > > > From: Liron Aravot > > Date: 2013-02-26 15:50 > > To: xianghuadu > > CC: users > > Subject: Re: [Users] ovirt Connection Storage error > > > > Hi, > > can you please attach the full vdsm log? > > > > ----- Original Message ----- > > > From: "xianghuadu" <[email protected]> > > > To: "users" <[email protected]> > > > Sent: Tuesday, February 26, 2013 9:27:05 AM > > > Subject: [Users] ovirt Connection Storage error > > > > > > > > > > > > Hi all > > > Add iscsi storage, Error while executing action New SAN storage > > > Domain: Unexpected exception. > > > engine log > > > > > > > > > > > > 2013-02-26 15:09:08,211 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] > > > (ajp--127.0.0.1-8702-1) [4952790e] HostName = 225 > > > 2013-02-26 15:09:08,212 ERROR > > > [org.ovirt.engine.core.vdsbroker.VDSCommandBase] > > > (ajp--127.0.0.1-8702-1) [4952790e] Command FormatStorageDomainVDS > > > execution failed. Exception: VDSErrorException: > > > VDSGenericException: > > > VDSErrorException: Failed to FormatStorageDomainVDS, error = > > > Cannot > > > format attached storage domain: > > > ('378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce',) > > > 2013-02-26 15:09:08,214 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.FormatStorageDomainVDSCommand] > > > (ajp--127.0.0.1-8702-1) [4952790e] FINISH, > > > FormatStorageDomainVDSCommand, log id: 1f498799 > > > 2013-02-26 15:09:08,215 ERROR > > > [org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand] > > > (ajp--127.0.0.1-8702-1) [4952790e] Command > > > org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand > > > throw > > > Vdc Bll exception. With error message VdcBLLException: > > > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: > > > VDSGenericException: VDSErrorException: Failed to > > > FormatStorageDomainVDS, error = Cannot format attached storage > > > domain: ('378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce',) > > > 2013-02-26 15:09:08,221 INFO > > > [org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand] > > > (ajp--127.0.0.1-8702-1) [4952790e] Lock freed to object > > > EngineLock > > > [exclusiveLocks= key: 378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce value: > > > STORAGE > > > , sharedLocks= ] > > > 2013-02-26 15:09:42,067 WARN > > > [org.ovirt.engine.core.bll.storage.UpdateStoragePoolCommand] > > > (ajp--127.0.0.1-8702-6) [a8c7727] CanDoAction of action > > > UpdateStoragePool failed. > > > Reasons:VAR__TYPE__STORAGE__POOL,ACTION_TYPE_FAILED_STORAGE_POOL_WITH_DEFAULT_VDS_GROUP_CANNOT_BE_LOCALFS,VAR__ACTION__UPDATE > > > 2013-02-26 15:09:59,224 INFO > > > [org.ovirt.engine.core.bll.storage.UpdateStoragePoolCommand] > > > (ajp--127.0.0.1-8702-3) [3d8faa5f] Running command: > > > UpdateStoragePoolCommand internal: false. Entities affected : ID: > > > da5870e0-7aae-11e2-9da5-00188be4de29 Type: StoragePool > > > 2013-02-26 15:10:00,000 INFO > > > [org.ovirt.engine.core.bll.AutoRecoveryManager] > > > (QuartzScheduler_Worker-80) Autorecovering hosts is disabled, > > > skipping > > > 2013-02-26 15:10:00,001 INFO > > > [org.ovirt.engine.core.bll.AutoRecoveryManager] > > > (QuartzScheduler_Worker-80) Autorecovering storage domains is > > > disabled, skipping > > > 2013-02-26 15:10:23,814 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand] > > > (ajp--127.0.0.1-8702-2) START, GetDeviceListVDSCommand(HostName = > > > 225, HostId = 342b111a-7fdf-11e2-a963-00188be4de29, > > > storageType=ISCSI), log id: 484eccef > > > 2013-02-26 15:10:24,119 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand] > > > (ajp--127.0.0.1-8702-2) FINISH, GetDeviceListVDSCommand, return: > > > [org.ovirt.engine.core.common.businessentities.LUNs@b420cc6], log > > > id: 484eccef > > > 2013-02-26 15:10:32,523 INFO > > > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand] > > > (ajp--127.0.0.1-8702-4) [66fa978c] Running command: > > > AddSANStorageDomainCommand internal: false. Entities affected : > > > ID: > > > aaa00000-0000-0000-0000-123456789aaa Type: System > > > 2013-02-26 15:10:32,539 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand] > > > (ajp--127.0.0.1-8702-4) [66fa978c] START, > > > CreateVGVDSCommand(HostName = 225, HostId = > > > 342b111a-7fdf-11e2-a963-00188be4de29, > > > storageDomainId=c13260c4-d1aa-455c-9031-0711a7a4cc8d, > > > deviceList=[1494554000000000078797a00000000000000000000000000], > > > force=false), log id: 4f1651f1 > > > 2013-02-26 15:10:32,578 ERROR > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] > > > (ajp--127.0.0.1-8702-4) [66fa978c] Failed in CreateVGVDS method > > > 2013-02-26 15:10:32,579 ERROR > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] > > > (ajp--127.0.0.1-8702-4) [66fa978c] Error code unexpected and > > > error > > > message VDSGenericException: VDSErrorException: Failed to > > > CreateVGVDS, error = Unexpected exception > > > 2013-02-26 15:10:32,581 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] > > > (ajp--127.0.0.1-8702-4) [66fa978c] Command > > > org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand > > > return > > > value > > > Class Name: > > > org.ovirt.engine.core.vdsbroker.irsbroker.OneUuidReturnForXmlRpc > > > mUuid Null > > > mStatus Class Name: > > > org.ovirt.engine.core.vdsbroker.vdsbroker.StatusForXmlRpc > > > mCode 16 > > > mMessage Unexpected exception > > > > > > 2013-02-26 15:10:32,585 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] > > > (ajp--127.0.0.1-8702-4) [66fa978c] HostName = 225 > > > 2013-02-26 15:10:32,586 ERROR > > > [org.ovirt.engine.core.vdsbroker.VDSCommandBase] > > > (ajp--127.0.0.1-8702-4) [66fa978c] Command CreateVGVDS execution > > > failed. Exception: VDSErrorException: VDSGenericException: > > > VDSErrorException: Failed to CreateVGVDS, error = Unexpected > > > exception > > > 2013-02-26 15:10:32,588 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand] > > > (ajp--127.0.0.1-8702-4) [66fa978c] FINISH, CreateVGVDSCommand, > > > log > > > id: 4f1651f1 > > > 2013-02-26 15:10:32,589 ERROR > > > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand] > > > (ajp--127.0.0.1-8702-4) [66fa978c] Command > > > org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand > > > throw > > > Vdc Bll exception. With error message VdcBLLException: > > > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: > > > VDSGenericException: VDSErrorException: Failed to CreateVGVDS, > > > error > > > = Unexpected exception > > > 2013-02-26 15:10:32,600 INFO > > > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand] > > > (ajp--127.0.0.1-8702-4) [66fa978c] Command > > > [id=62567c07-e736-4909-a501-ee8663d71eac]: Compensating > > > NEW_ENTITY_ID of > > > org.ovirt.engine.core.common.businessentities.storage_domain_dynamic; > > > snapshot: c13260c4-d1aa-455c-9031-0711a7a4cc8d. > > > 2013-02-26 15:10:32,607 INFO > > > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand] > > > (ajp--127.0.0.1-8702-4) [66fa978c] Command > > > [id=62567c07-e736-4909-a501-ee8663d71eac]: Compensating > > > NEW_ENTITY_ID of > > > org.ovirt.engine.core.common.businessentities.storage_domain_static; > > > snapshot: c13260c4-d1aa-455c-9031-0711a7a4cc8d. > > > 2013-02-26 15:10:32,617 ERROR > > > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand] > > > (ajp--127.0.0.1-8702-4) [66fa978c] Transaction rolled-back for > > > command: > > > org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand. > > > vdsm log > > > > > > > > > > > > Thread-1296::DEBUG::2013-02-26 > > > 15:19:23,200::resourceManager::844::ResourceManager.Owner::(cancelAll) > > > Owner.cancelAll requests {} > > > Thread-1296::DEBUG::2013-02-26 > > > 15:19:23,200::task::978::TaskManager.Task::(_decref) > > > Task=`d9716eca-da88-472d-8fdd-19b8be8a02ab`::ref 0 aborting False > > > Thread-1302::DEBUG::2013-02-26 > > > 15:19:33,367::task::588::TaskManager.Task::(_updateState) > > > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::moving from state > > > init > > > -> state preparing > > > Thread-1302::INFO::2013-02-26 > > > 15:19:33,367::logUtils::37::dispatcher::(wrapper) Run and > > > protect: > > > repoStats(options=None) > > > Thread-1302::INFO::2013-02-26 > > > 15:19:33,368::logUtils::39::dispatcher::(wrapper) Run and > > > protect: > > > repoStats, Return response: {} > > > Thread-1302::DEBUG::2013-02-26 > > > 15:19:33,368::task::1172::TaskManager.Task::(prepare) > > > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::finished: {} > > > Thread-1302::DEBUG::2013-02-26 > > > 15:19:33,368::task::588::TaskManager.Task::(_updateState) > > > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::moving from state > > > preparing -> state finished > > > Thread-1302::DEBUG::2013-02-26 > > > 15:19:33,368::resourceManager::809::ResourceManager.Owner::(releaseAll) > > > Owner.releaseAll requests {} resources {} > > > Thread-1302::DEBUG::2013-02-26 > > > 15:19:33,368::resourceManager::844::ResourceManager.Owner::(cancelAll) > > > Owner.cancelAll requests {} > > > Thread-1302::DEBUG::2013-02-26 > > > 15:19:33,368::task::978::TaskManager.Task::(_decref) > > > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::ref 0 aborting False > > > _______________________________________________ > > > Users mailing list > > > [email protected] > > > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
