Will be included in 1.0.1
----- Original Message ----- > From: "Jeff Bailey" <[email protected]> > To: [email protected] > Sent: Friday, March 8, 2013 1:29:28 AM > Subject: Re: [Users] install a f18 host with ovirtmgmt vlan tagged > > > On 3/7/2013 11:05 AM, Gianluca Cecchi wrote: > > On Thu, Mar 7, 2013 at 4:38 PM, Gianluca Cecchi > > <[email protected]> wrote: > >> On Thu, Mar 7, 2013 at 3:58 PM, Gianluca Cecchi wrote: > >>> # cat ifcfg-em3.65 > >>> DEVICE=em3.65 > >>> ONBOOT=yes > >>> BOOTPROTO=none > >>> VLAN=yes > >>> IPADDR=10.4.4.57 > >>> NETMASK=255.255.255.0 > >>> GATEWAY=10.4.4.250 > >>> NM_CONTROLLED=no > >>> > >>> How should I configure the host at the beginning to have > >>> ovirtmgmt > >>> configured as VLAN tagged and host deploy with no complain? > >>> > >>> Thanks in advance, > >>> Gianluca > >> Tried also the alternative configuration with ifcfg-vlan65 instead > >> of > >> ifcfg-em3.65: > >> > >> # cat ifcfg-vlan65 > >> DEVICE=vlan65 > >> PHYSDEV=em3 > >> ONBOOT=yes > >> BOOTPROTO=none > >> VLAN=yes > >> IPADDR=10.4.4.57 > >> NETMASK=255.255.255.0 > >> GATEWAY=10.4.4.250 > >> NM_CONTROLLED=no > >> > >> But I get > >> Failed to execute stage 'Setup validation': Interface vlan65 is > >> VLAN > >> interface However its configuration is unexpected. > >> > >> Possibly the involved code is on engine > >> /usr/share/otopi/plugins/ovirt-host-deploy/vdsm/bridge.py ? > >> > >> In host-deploy log: > >> > >> 2013-03-07 16:31:53 DEBUG > >> otopi.plugins.ovirt_host_deploy.vdsm.bridge > >> bridge._getInterfaceForDestination:302 determine interface > >> for 10.4.4.60 > >> 2013-03-07 16:31:53 DEBUG > >> otopi.plugins.ovirt_host_deploy.vdsm.bridge > >> plugin.executeRaw:347 execute: ('/sbin/ip', 'route', 'get' > >> , 'to', '10.4.4.60'), executable='None', cwd='None', env=None > >> 2013-03-07 16:31:53 DEBUG > >> otopi.plugins.ovirt_host_deploy.vdsm.bridge > >> plugin.executeRaw:364 execute-result: ('/sbin/ip', 'route' > >> , 'get', 'to', '10.4.4.60'), rc=0 > >> 2013-03-07 16:31:53 DEBUG > >> otopi.plugins.ovirt_host_deploy.vdsm.bridge > >> plugin.execute:411 execute-output: ('/sbin/ip', 'route', ' > >> get', 'to', '10.4.4.60') stdout: > >> 10.4.4.60 dev vlan65 src 10.4.4.57 > >> cache > >> > >> 2013-03-07 16:31:53 DEBUG > >> otopi.plugins.ovirt_host_deploy.vdsm.bridge > >> plugin.execute:416 execute-output: ('/sbin/ip', 'route', ' > >> get', 'to', '10.4.4.60') stderr: > >> > >> > >> 2013-03-07 16:31:53 DEBUG > >> otopi.plugins.ovirt_host_deploy.vdsm.bridge > >> bridge._getInterfaceForDestination:337 interface for 10.4. > >> 4.60 is vlan65 > >> 2013-03-07 16:31:53 DEBUG otopi.context context._executeMethod:130 > >> method exception > >> Traceback (most recent call last): > >> File "/tmp/ovirt-xz8p0a0BfX/pythonlib/otopi/context.py", line > >> 120, > >> in _executeMethod > >> method['method']() > >> File > >> "/tmp/ovirt-xz8p0a0BfX/otopi-plugins/ovirt-host-deploy/vdsm/bridge.py", > >> line 733, in _validation > >> self._getVlanMasterDevice(name=interface) > >> File > >> "/tmp/ovirt-xz8p0a0BfX/otopi-plugins/ovirt-host-deploy/vdsm/bridge.py", > >> line 393, in _getVlanMasterDevice > >> interface=name, > >> RuntimeError: Interface vlan65 is VLAN interface However its > >> configuration is unexpected > >> 2013-03-07 16:31:53 ERROR otopi.context context._executeMethod:139 > >> Failed to execute stage 'Setup validation': Interface vlan65 is > >> VLAN > >> interface However its configuration is unexpected > >> > >> > >> Do I have perhaps to name it ovirtmgmt from the beginning? > >> > >> Gianluca > > I'm all but a python expert..... > > > > but I think these blocks in > > /usr/share/otopi/plugins/ovirt-host-deploy/vdsm/bridge.py are the > > ones > > involved > > Yes, I ran into this same problem with _RE_VLAN_ID not matching on > whitespace instead of an actual space (there's a tab in the output). > Alon submitted a patch last month but I don't remember if it has made > it > into a released rpm. Here's the relevant part: > > --- a/src/plugins/ovirt-host-deploy/vdsm/bridge.py > +++ b/src/plugins/ovirt-host-deploy/vdsm/bridge.py > @@ -128,8 +128,9 @@ class Plugin(plugin.PluginBase): > _RE_VLAN_ID = re.compile( > flags=re.VERBOSE, > pattern=r""" > + ^ > .* > - VID: ([0-9]+) > + \sVID:\s(\d+)\s > .* > """ > ) > > > > > ... > > _RE_VLAN_ID = re.compile( > > flags=re.VERBOSE, > > pattern=r""" > > .* > > VID: ([0-9]+) > > .* > > """ > > ) > > _RE_VLAN_ID_VLANID = 1 > > > > _RE_VLAN_DEVICE = re.compile( > > flags=re.VERBOSE, > > pattern=r""" > > ^ > > Device: > > \s+ > > (\S+) > > \s* > > $ > > """ > > ) > > _RE_VLAN_DEVICE_DEVICE = 1 > > > > ... > > > > > > def _getVlanMasterDevice(self, name): > > interface = None > > vlanid = None > > try: > > with open( > > os.path.join( > > '/proc/net/vlan', > > name > > ), > > 'r' > > ) as f: > > for line in f: > > m = self._RE_VLAN_ID.match(line) > > if m is not None: > > vlanid = m.group(self._RE_VLAN_ID_VLANID) > > else: > > m = self._RE_VLAN_DEVICE.match(line) > > if m is not None: > > interface = > > m.group(self._RE_VLAN_DEVICE_DEVICE) > > > > if interface is None or vlanid is None: > > raise RuntimeError( > > ... > > > > In my case: > > # cat /proc/net/vlan/vlan65 > > vlan65 VID: 65 REORDER_HDR: 1 dev->priv_flags: 1 > > total frames received 1910 > > total bytes received 1319518 > > Broadcast/Multicast Rcvd 4 > > > > total frames transmitted 2232 > > total bytes transmitted 426338 > > Device: em3 > > INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 > > EGRESS priority mappings: > > _______________________________________________ > > Users mailing list > > [email protected] > > http://lists.ovirt.org/mailman/listinfo/users > > _______________________________________________ > Users mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
